APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 Fischer adhesives and sealants Threaded bars for injection mortars Drill Ø Dimension FI FISA M6x75** --- 8 50 17 (-) M 6 x 75 FI FISA M6x85 --- 8 50 27 (2) M 6 x 85 FI FISA M8x90 --- 10 60 19 (4) M 8 x 90 FI FISA M8x110 --- 10 60 39 (24) M 8 x 110 FI FISA M8x130 --- 10 60 59 (44) M 8 x 130 FI FISA M10x110 FI FISA M10x110 ES 12 60 37 (22) M 10 x 110 FI FISA M10x130 FI FISA M10x130 ES 12 60 57 (42) M 10 x 130 FI FISA M10x150 FI FISA M10x150 ES 12 60 77 (62) M 10 x 150 FI FISA M10x200 FI FISA M10x200 ES 12 60 127 (112) M 10 x 200 FI FISA M12x140 --- 14 70 54 (49) M 12 x 140 FI FISA M12x160 FI FISA M12x160 ES 14 70 74 (69) M 12 x 160 FI FISA M16x175 --- 18 80 75 (55) M 16 x 175 FI FISA M16x200 --- 18 80 100 (84) M 16 x 200 * values in brackets apply for brickwork or aerated concrete. The anchoring depth there is 75 mm. ** for fixing in the brickwork, please use anchor sleeves FISCHER FISH 1250 K Application: The threaded bars cut to length are used in conjunction with the injection mortar, and where applicable, anchor sleeves for fixing sockets, rails, shelves, consoles, railings, scaffolding or facades. In conjunction with the injection mortar FIS VS... this threaded bar has an approval from the construction supervision. Can be used in non-cracked con- crete, brickwork (where applicable use anchor sleeves) and aerated concrete. Anchor sleeves for injection mortars Type Drill Ø Amount FISCHER FISH 1250K 12 60 50 5 M6-M8 50 packs FISCHER FISH 1285K 12 95 85 10 M6-M8 50 packs FISCHER FISH 1685K 16 95 85 12 M8-M10 50 packs FISCHER FISH 16130K 16 140 130 15 M8-M10 20 packs FISCHER FISH 2085K 20 95 85 15 M12-M16 20 packs FISCHER FISH 20130K 20 140 130 25 M12-M16 20 packs FISCHER FISH 20200K 20 210 200 40 M12-M16 20 packs Application: Anchor sleeves were used in order to anchor threaded bars using injection mortar also in the hole materi- als. The anchor sleeve is especially coordinated for the Fischer injection mortar, therefore only small mortar quantity (re- duced up to 80%) is required. With the centring wing of the anchor sleeve, the anchor rod is securely centred in the borehole, and an even load distribution is ensured. Injection mortars Type Description FISCHER M 300T FISCHER FIS SB 390S type FISCHER M 300T type FISCHER FIS SB 390S FISCHER FIS MIX R Styrene-free, rapid-hardening assembling mortar (contains vinyl ester mortar) for applications in brickwork and non-cracked concrete. A vast variety of applications in practically all building materials are re- gulated by several approvals (e.g. DIBt) guaranteeing maximum safety. Supply volume: 300 ml standard cartridge incl. 2 mix nozzles Injection system on vinyl-hybrid basis, two-component cartridge, for application in cracked and non-cracked concrete and natural stone with dense micro-structure. Supply volume: 390 ml dual-chamber cartridge incl. 2 mix nozzles Type replacement mix nozzle (10 packs) Min. hole depth Capacity (scale parts) For threaded bars Min. depth of anchoring Type zinc-plated steel Type stainless steel A4 Max. usable length* Anchoring depth 638 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl