APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 Cleaning technology Oil binding agent (grit) Type Material Description UNIVERSAL OLBG SSORB 20 kg 15 l 0.5 - 1 mm (approx. (615 g/l) 32 l) OIL-ONLY OLBG 2000 50 l 33 l 0.125 - 4 mm Polyurethane (approx. (260 g/l) 12 kg) Oil binding cloths/socks Type Description UNIVERSAL (grey) OLBT E1000 25 cloths 25 l 40x50 cm OLBR E1500S 2 rolls, perforated 200 l 0.48x44 m OLBR E1500 1 roll, perforated 200 l 0.97x44 m OLBS U10 10 socks 35 l 8x120 cm OIL-ONLY (white) OLBT E100 25 cloths 38 l 40x50 cm OLBS P10 10 socks 40 l 8x120 cm type OLBG 2000 type OLBG SSORB cloths rollers socks Oil binding carpet Suitable: Carpet to be laid out in areas such as in front of tooling machines or repair sites, etc., where oils and other non-aggressive fluids must be reliably absorbed. A slip-proof plastic film protects the bottom surface, even under super- saturation or when there is strong pressure against the fluid. The dark covering layer securely retains absorbed fluids in the carpet, and allows for walking and driving over the carpet without damaging it. Due to its dark surface, the carpet has a long service life. Structure: Triple-layered structure with a reinforced surface and a sealed and slip-proof foil on the underside Type Dimension Fluid intake per roll (approx.) UNIVERSAL (grey) for universal binding of non-corrosive liquids and oils, black top surface OLBTP U80 1 roll 0.80x30 m 103 l OLBTP U120 1 roll 1.20x30 m 154 l OIL-ONLY (white),exclusively for the removal of oils, fuels, and other hydrocarbons. Will not take up water and is therefore ideal in oily conditions on the exterior, brown top surface OLBTP P80 1 roll 0.80x30 m 103 l OLBTP P120 1 roll 1.20x30 m 154 l PE canisters + buckets from page 642 Dustpans and hand sweepers on page 584 Cables can be found on page 643 Knives on page 595 Oil intake per sack (approx.) Sack contents Grain size (bulk density) tested oil binding agents type III R on Se- piolith basis Is a chemical inert product, not flammable and not toxic. Ideally suited to take up oils, chemi- cals, weak acids and alkalis . Suitable for industry, trades, roads and traffic sur- faces. Possesses anti-slip effect and is ideal for roads and pedestrian paths. tested, buoyant oil binding agents Type I, II, III R on PUR basis. Absorbs oils, but nearly no water. Suitable for industry, trades, streets and traffic surfaces and waters. Especially suited for tiled and sealed workshop and industry floors. Do not use for acids or al- kalis! Magnesium silicate hydroxide Multi-layered, lint-free PP binding fleece with optimum suction performance and strong durability. Dimple-weld for particularly stable construction. Socks are filled with cellulose. Suitable for universal binding of non-corrosive liquids and oils . Consists of water repellent PP fibres, exclusively for ab- sorbing oils, fuels and other hydrocarbons . Takes, up to 20 times its own weight. Ideal if no water is to be absorbed. Swims also in water when in saturated state. Package contents format Fluid intake per pack (approx.) APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 581