APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 Lubrication technology 4 5 6 7 1 2 3 type press Straight ball grease nipple DIN 71412 A Thread SW SNH1 M6x1* SNH1 M6x1 ES M 6 (con.) 5.5 mm 7 mm SNH1 M8x1* SNH1 M8x1 ES M 8 x 1 (con.) 5.5 mm 9 mm SNH1 M8x1.25 SNH1 M8x1.25 ES M 8 (con.) 5.5 mm 9 mm SNH1 M10x1* SNH1 M10x1 ES M 10 x 1 (con.) 5.5 mm 11 mm SNH1 M10x1.5 SNH1 M10x1.5 ES M 10 (con.) 5.5 mm 11 mm SNH1 18* SNH1 18 ES R 1 / 8 “ 5.5 mm 11 mm SNH1 14 SNH1 14 ES R 1 / 4 “ 6.5 mm 14 mm * preferred types 45° ball grease nipple DIN 71412 B Thread SW SNH2 M6x1* SNH2 M6x1 ES M 6 (con.) 5.5 mm 9 mm SNH2 M8x1* SNH2 M8x1 ES M 8 x 1 (con.) 5.5 mm 9 mm SNH2 M8x1.25 SNH2 M8x1.25 ES M 8 (con.) 5.5 mm 9 mm SNH2 M10x1* SNH2 M10x1 ES M 10 x 1 (con.) 5.5 mm 11 mm SNH2 M10x1.5 SNH2 M10x1.5 ES M 10 (con.) 5.5 mm 11 mm SNH2 18* SNH2 18 ES R 1 / 8 “ 5.5 mm 11 mm SNH2 14 SNH2 14 ES R 1 / 4 “ 6.5 mm 14 mm * preferred types 90° ball grease nipple DIN 71412 C Thread SW SNH3 M6x1* SNH3 M6x1 ES M 6 (con.) 5.5 mm 9 mm SNH3 M8x1* SNH3 M8x1 ES M 8 x 1 (con.) 5.5 mm 9 mm SNH3 M8x1.25 SNH3 M8x1.25 ES M 8 (con.) 5.5 mm 9 mm SNH3 M10x1* SNH3 M10x1 ES M 10 x 1 (con.) 5.5 mm 11 mm SNH3 M10x1.5 SNH3 M10x1.5 ES M 10 (con.) 5.5 mm 11 mm SNH3 18* SNH3 18 ES R 1 / 8 “ 5.5 mm 11 mm SNH3 14 SNH3 14 ES R 1 / 4 “ 6.5 mm 14 mm * preferred types Grease presses for 400 g grease cartridges* DIN 1283 Type Version Connection Figure Grease press assembly FEPR R Grease press with tube and coupling R 1 / 8 “ Press incl. 1 FEPR S Grease press with hose (300 mm) and coupling R 1 / 8 “ Press incl. 2 FEPR RS Grease press with tube, hose (300 mm) and coupling R 1 / 8 “ Press incl. 1 & 2 Replacement parts FEPR ROHR Tube (150 mm) R 1 / 8 “ (MT) 1 FEPR SCHL 200 Hose (200 mm) R 1 / 8 “ (MT) 2 FEPR SCHL 300 Hose (300 mm) R 1 / 8 “ (MT) 2 FEPR SCHL 500 Hose (500 mm) R 1 / 8 “ (MT) 2 FEPR SCHL 200 OK Hose (200 mm) without coupling R 1 / 8 “ (MT) 3 FEPR SCHL 300 OK Hose (300 mm) without coupling R 1 / 8 “ (MT) 3 FEPR SCHL 500 OK Hose (500 mm) without coupling R 1 / 8 “ (MT) 3 FEPR KUP 18 Coupling with 4 cheeks for ball grease nipple G 1 / 8 “ (FT) 4 FEPR KUPD 18 Coupling as nozzle for funnel type grease nipple G 1 / 8 “ (FT) 5 FEPR KUPFL 10 Coupling for flat grease nipple, 10 mm G 1 / 8 “ (FT) 6 FEPR KUPFL 16 Coupling for flat grease nipple, 16 mm G 1 / 8 “ (FT) 6 FEPR KUPFL 22 Coupling for flat grease nipple, 22 mm G 1 / 8 “ (FT) 6 FEPR KUPFL 16 O Open coupling for flat grease nipple, 16 mm G 1 / 8 “ (FT) 7 * max. 240 x 56 mm, suitable for 215 x 50 mm cartridges (DIN 1284) or 500 ml loosely filled Compressed air grease presses Type Material flow in the interval (with each triggering only a small amount of grease flows) FEPR LU 1.2 170 2 - 10 bar 400 g 40:1 Coupling plug NW 7.2** Continuous material flow (as long as the trigger is depressed, grease is flowing) FEPR LU K 1.6 370 4 - 10 bar 400 g 40:1 Coupling plug NW 7.2** * max. 240 x 56 mm, suitable for 215 x 50 mm cartridges (DIN 1284) or 500 ml loosely filled, **standard coupling Thread length Type zinc-plated steel Type AISI 303 Thread length Type zinc-plated steel Type AISI 303 Thread length Type zinc-plated steel Type AISI 303 Air consump- tion l/min. Weight kg Operating pressure For grease cartridges* Compression ratio Air connection APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 577