APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 Lubricants/lubrication technology Type Type 46 mm²/sec* 32 mm²/sec* Packing HLP 46 OL HLP 32 OL 1 litre HLP 46 OL 5 HLP 32 OL 5 5 litres (DIN 51) HLP 46 OL 10 HLP 32 OL 10 10 litres (DIN 51) HLP 46 OL 20 HLP 32 OL 20 20 litres (DIN 61) * viscosity at 40°C Hydraulic oil - HLP - primary raffinate DIN 51524/2 Applications: Recommended for use in high performance hydraulic systems for heavy-duty operations, including high- rev/high-pressure applications in vane, gear and axial piston pumps. Excellent compatibility with bronze and steel com- ponents in addition to all types of valves and servos. Recommended for use when lubricating tooling machines that require technology resistant to wear. Suitable for customary lubrication systems for spindles and gears. Special oil for piston compressors Type Packing CD 100 1 litre CD 100 5 5 litres (DIN 51) Type Packing Standard oil: In heated halls or outside areas > 5°C S OL 1 litre S OL 5 5 litres (DIN 51) S OL 10 10 litres (DIN 51) S OL 20 20 litres (DIN 61) Special oil: For increased condensate emergence e.g. unheated halls or outside areas < 5°C S OL Wi 1 litre S OL Wi 5 5 litres (DIN 51) S OL Wi 10 10 litres (DIN 51) S OL Wi 20 20 litres (DIN 61) Special oils for pneumatic lubricators Temperature range: -35°C to max. +85°C Special for the food industry! TIP Special oils for pneumatic lubricators in the food industry Type Packing S OL LE 1 litre S OL LE 5 5 litres (DIN 51) S OL LE 10 10 litres (DIN 51) S OL LE 20 20 litres (DIN 61) Corresponds to the Guidelines for cleanliness laid down in the German Pharmacopoeia (DAB 10) and the FDA-Regulati- ons 21 CFR 178.3620 (a). The oil is clear as glass and is totally odourless and tasteless. Suitable: Food industry Type Description DSD 500 DSD 500 REP DSD 500 FS Refillable compressed air spray can Suitable: Suitable for all liquids that can be processed with compressed air (except for alkaline or acidic liquids attak- king plastics). Can be used in all workshops and industries in which loose goods, such as cutting oil, rust remover, leak detection spray, lubricating and separating agents are used. The inner wall of the spray nozzle is coated and can be filled with air from any commercially available tyre inflator or directly with the optional filling spouts. Max. fill pressure: 10 bar, max. temperature: +40°C. type filling spouts Suitable: To indicate the oil level in the containers. Materials: Body: aluminium, window: Transparent glass Temperature range: -10°C to max. +250°C Pressure range: 0 up to15 bar (1 1 / 2 “ - 2“: up to 30 bar) Media: Mineral oil SW OSA 14 GM 14 MS G 1 / 4 “ 8 17 OSA 38 GM 38 MS G 3 / 8 “ 9 22 OSA 12 GM 12 MS G 1 / 2 “ 9 27 OSA 34 GM 34 MS G 3 / 4 “ 11 32 SW OSA 10 GM 10 MS G 1“ 10 40 OSA 114 GM 114 MS G 1 1 / 4 “ 12 50 OSA 112 GM 112 MS G 1 1 / 2 “ 17 55 OSA 20 GM 20 MS G 2“ 16 70 Oil level inspection glass with reflector Type inspec- tion glass Type counter nut Thread length Connect. thread Type inspec- tion glass Type counter nut Thread length Connect. thread Refillable compressed air spray can with 500ml liquid filling quantity inclusive of the finely atomizing spray head. Spare part packet for DSD 500 (contains valve, point spraying spray head, point spraying spray head with additional tube, fine atomising spray head, finest atomising spray head). Filling spouts for refilling the DSD 500 spray nozzle, suitable for NW 7.2 workshop coupling. For filling with compressed air, the compressed air spray can is simply pressed onto the sockets. 574 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl