APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 O-ring set With this set you can create your own O-rings in seconds. The round cord included is cut to length and glued together in seconds using a special adhesive. The bond is as strong as the rubber itself. Supply volume: NBR round cords (each 1 m) in diameters 1.6 mm, 2.5 mm, 3.2 mm, 5.9 mm, and 8.8 mm, cutting template, cutting knife, Loctite 406 adhesive, complete in a practical plastic case Metal Magic Steel (TM) Stick Processing time Hand tight Hardening Temperature range 3463 KALTMETALL* 3 minutes 6 minutes 10 minutes -30°C to +120°C * temperature range: -35°C to max. +180°C, hardening in 30 minutes Loctite 3463 is a kneadable, two component repair material to fill and repair cracks and defects in housings and pipe- lines. The material sticks to dry and wet surfaces and even cures under water. When cured, the material can be machine finished and painted. Pipe Repair Kit Type Processing time Temperature range 5070 3 minutes -30°C to +120°C Loctite 5070 is designed to be used for quick repairs to steel of plastic pipes/tubes, or to reinforce vulnerable areas. Supply volume: The set includes protective gloves, Loctite 3463 and a urethane-impregnated GFK-tape Type Packing Function 8040 400 ml Spray can Fast rust dissolver Tape band (extra strong) Adhesive tape for repairing, reinforcing, mounting and sealing. Suitable for all applications in plumbing and heading sy- stems as well as automotive and industrial applications. Advantages: • Can be torn by hand • Temperature range from -10°C to max. +70°C • 100% water resistant • Pressure resistant up to 4 bar ü Roller length 5080/25 --- 25 m 5080/50 KLBG 50/50 SIL 50 m * similar technical data, temperature range: 0°C to +60°C max., please request the rest ORSET Adhesive for rubber (round cords) Packing Description 406/20 SK 32/20 20 g To +120°C 2 - 10 sec. --- SK 32/50 50 g 406/100 --- 100 g 406/500 SK 32/500 500 g * average value at 22°C, **Similar properties (see page 553 and on for technical data or request that information from us.) - The complete program Type alternative Type Loctite Type complete set Type Loctite Type Loxeal** Fixing time* Temperature range Cools rusted up and seised parts (bolts, screws, nuts) to a temperature of ap- proximately - 43°C. From a “shock freezing effect“ microscopic cracks open in the layer of rust that can then be penetrated by the lubricant contained in the spray. Immediately afterwards the treated parts can be undone with mini- mal effort. Quick adhesion of rubbers (including EPDM), plastics and elastomers . In combination with the primer 7239/4, even plastics with poor adherence properties, such as FKM or PP, adhere to each other. Type alternative* Type Locite 560 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl