APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 - The complete program Thread sealing fibre Packing Thread Temperature range 55/50 --- 50 m Up to 4“ -20°C to max. +130°C 55/160 --- 160 m Up to 4“ -20°C to max. +130°C --- DB 55/175 175 m Up to 4“ -200°C to max. +240°C Application: Thread sealing fibre for applying plastic and metal screw threads. Developed especially for pneumatic, hy- draulic and sanitary applications. Replaces hemp, pastes and PTFE sealing tapes; does not harden and remains soft and adaptable (alternative type in addition: resistant against almost all known chemicals, absolutely inactive) Media: Loctite type: Air, drinking water (max. 16 bar, max. +85°C), hot water (max. 7 bar, max. +130°C), gas (max. 5 bar, -20°C to +70°C), oxygen (max. 20 bar, max. +60°C), industrial oils Alternative type: Air, drinking water, gas (gaseous form max. 5 bar, liquid form max. 20 bar, -20°C to +125°C), propane, butane, ammonia, hydrogen, oxygen (max. 30 bar, max. +100°C - gaseous form with lubricant, liquid form without lu- bricant), oils, solvents, acids, alkalis, fuels, refrigerants, steam Approvals: DVGW gas and hot water, KTW recommendation, WRAS, BAM for oxygen, (Loctite type, additionally NSF 61, alternative type, additionally ASTM F423 steam & cold water as well as KIWA GASTEC) Joints Packing Description High strength (temperature range: To max. +150°C, type 638 & 648: To max. +180°C, type 620: To max. +230°C) 638/10 85-21/10 10 ml Up to 0.25 mm 4 min. 638/50 85-21/50 50 ml 638/250 85-21/250 250 ml 620/50 --- 50 ml Up to 0.2 mm 80 min. 620/250 --- 250 ml 648/10 83-21/10 10 ml Up to 0.15 mm 3 min. 648/50 83-21/50 50 ml 648/250 83-21/250 250 ml 603/10 --- 10 ml Up to 0.1 mm 8 min. 603/50 82-33/50 50 ml 603/250 82-33/250 250 ml 660/50 --- 50 ml Up to 0.5 mm 20 min. --- 89-51/75 75 ml Up to 0.3 mm 30 min. Medium strength (temperature range: -55°C to max. +150°C) 641/10 --- 10 ml Up to 0.1 mm 30 min. 641/50 53-11/50 50 ml 641/250 --- 250 ml * average value at 22°C, **Similar properties (see page 552 and on for technical data or request that information from us.) Seal flax* Type Description Plait FLACHS MAZZONI Original seal flax MAZZONI “1A Extra“, braid with approx. 200g Dispenser FLACHS DISP 40 Seal flax in the dispenser, approx. 40g FLACHS DISP 80 Seal flax in the dispenser, approx. 80g Dispenser FLACHSI Flax dispenser “FLACHSI“ +GF+ (without flax coil) FLACHSI SPULE Flat coil for “FLACHSI“, original +GF+ FLACHSI SPULE B Flat coil for “FLACHSI“, alternative * only use for metal connections! Plait dispenser dispenser Type Loctite Bonding gap Fixing time* Type Loxeal** Recommended for cylindrical parts that are continuously maintained and, if neces- sary, removed, such as e.g. mounting of bearings on shafts or in bearing housings. Quick metal with a very high gap filling. Ideal for repairing worn out bearing seats, shafts, bushes and feather keys. Use with Loctite 7240 activator. For fixing cylindrical components with limi- ted gaps. Is particularly suited for bearing attachment . Tolerates oily contaminants to a small extent. Tested and recommen- ded for leading manufacturers of roller be- arings. Joint products with good gap filling, quick touch-safe and excellent temperature stability (up to +180°C) . For mounting bearings, shafts, etc. Also well-suited to passive surfaces such as stainless steel. DVGW, NSF and WRAS approval . Special joint products with high gap filling and extended temperature stability (to +230°C) . For mounting dowels in coolers, slide bus- hes in pump housings and bearings in ve- hicle gearboxes. Special joint products with very high gap filling and excellent temperature stabi- lity (to +180°C). For adhesion of compo- nents that are used in gears, pulley blocks or similar applications. Also well-suited to passive surfaces such as stainless steel. DVGW, NSF and WRAS approval . Type alternative Type Loctite 556 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl