APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 Liquid seals/adhesives Packing Function SK 43/20 401/20 20 g 2-5 sec. Universal type - Standard SK 43/50 401/50 50 g SK 43/500 401/500 500 g SK 14/20 --- 20 g 4-8 sec. For metal, rubber and plastic SK 14/50 --- 50 g SK 29/20 20 g 8-15 sec. SK 29/500 500 g SK 32/20 406/20 20 g 1-2 sec. SK 32/50 --- 50 g SK 32/500 --- 500 g SK 47/20 454/20 20 g 4-8 sec. SK 63/20 --- 20 g 8-15 sec. odourless, non-blooming * similar properties, see page 558 and on for technical data or request that information from us Manual dispensing guns for anaerobic adhesives Loxeal primer and activator Loxeal and instant adhesive (cyanoacrylate adhesive) Used for Description 98414 50 ml bottle 97001 250 ml bottle Temperature range: -50°C to max. +80°C Type Packing Pot life Function 31-42/25 25 ml twin syringe 12-14 5 min Standard, clear and colourless 31-42/50 50 ml dual cartridge* 35-44/50 50 ml dual cartridge* 5-9 20 min Clear, flexible, high peel strength 34-15/50 50 ml dual cartridge* 5-10 35 min Elastic, high shock resist. and peel strength 36-10/50 50 ml dual cartridge* 12-18 1-2 hours High-strength Accessories HPK Dispensing gun with dual cartridge insert for processing 2-component adhesives (50 ml) HPKB-MD Mixing nozzle (B system) for 25 ml twin syringe and 50 ml dual cartridge * Dispensing gun required Loxeal 2-component adhesive in double cartridge Temperature range: -30°C to max. +80°C Processing: For the exact dosage, the HPK manual gun with mixing nozzle is required in the case of the 50 ml dual car- tridge. For the 25 ml twin syringe, no manual gun is required. However, we recommend the use of the mixing nozzle HPKB-MD. type HPKB-MD Leak detection sprays Type Packing Function LSS 400 ml Spray can LSS-5 5 l canister (DIN 51) Accessories for canister goods DPZ 10 KHA DIN51 Drain cock for 5 l and 10 l canisters (DIN 51). Reusable. Outstanding value! Black adhesive for impact resistant metal/metal and metal/plastic bonding Setting time For porous and absorbent surfaces and larger tolerances. Processing possible on vertical surfaces, gel Hardens quickly, for rubber, EPDM and microcellular rubber, O-ring repairs Affordable manual dispensing device. Compatible with all anaerobic adhesives (Loctite and Loxeal). Tensile strength (N/mm²) Type Loxeal Type Loctite * Type Loctite Leak detection spray (DVGW approved). Spray the area to be tested, any leaks will be indicated by foaming. Suitable for compressed air, heating and compressed gas equipment of all types, air tanks, screw connections, valves and fittings. With corrosion protection, non-flammable. Outstanding value! Packing Function Primer PRIMER 7 --- 20 ml Activator AKTIVATOR 9 --- 200 ml Spray can AKTIVATOR 11 L AKTIVATOR 11 200 ml Spray can . Activates passive surfaces such as stainless steel, zinc, nickel or plastic. Speeds up the hardening for anaerobic adhesives. Speeds up the hardening for cyanoacrylate (instant adhesive) on porous or absorbent surfaces, prevents blooming. Surface treatment for cyanoacrylate adhesives of plastics with poor adherence properties such as PE, PP, thermoplastic ela- stomers, silicone and PTFE. Type Loxeal Type alternative Glass with brush Professional pressure pump atomiser for approx. 1 litre REINIGER M-5/10, REI- NIGER LE-1, LSS-5 leak detection spray (not REINIGER i-5), materials: PP/FKM. APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 553