APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 10 Liquid seals/adhesives Function 18-10/50 511/50 50 -55°C to +150°C 0.30 6-11 18-10/250 511/250 250 -55°C to +150°C 0.30 6-11 53-14/10 542/10 10 -55°C to +150°C 0.15 12-16 53-14/50 542/50 50 -55°C to +150°C 0.15 12-16 53-14/250 542/250 250 -55°C to +150°C 0.15 12-16 55-37/50 --- 50 -55°C to +150°C 0.25 18-22 55-37/250 --- 250 -55°C to +150°C 0.25 18-22 58-11/50 577/50 50 -55°C to +150°C 0.50 18-22 58-11/250 577/250 250 -55°C to +150°C 0.50 18-22 85-86/50 620/50 50 -55°C to +200°C 0.30 28-36 85-86/250 620/250 250 -55°C to +200°C 0.30 28-36 * Similar properties, see page 555 and on for technical data or request that information from us Loxeal anaerobic adhesives/seals Function: These liquid polymeric materials undergo curing together with metals in a hermetically sealed environment. They find applications in securing, mounting and sealing threaded connections, surface joints and joint connections. Note: Passive surfaces, such as stainless steel, chrome, nickel, zinc or plastic, should be pre-treated with AKTIVATOR to ensure optimum adhesion. Function 24-18/50 222/50 50 -55°C to +150°C 0.20 5-8 24-18/250 222/250 250 -55°C to +150°C 0.20 5-8 55-03/10** 243/10 10 -55°C to +150°C 0.25 18-23 55-03/50** 243/50 50 -55°C to +150°C 0.25 18-23 55-03/250** 243/250 250 -55°C to +150°C 0.25 18-23 83-05/50*** --- 50 -55°C to +200°C 0.50 20-30 83-05/250*** --- 250 -55°C to +200°C 0.50 20-30 70-14/50 290/50 50 -55°C to +150°C 0.07 15-25 70-14/250 290/250 250 -55°C to +150°C 0.07 15-25 --- 2701/10 10 -55°C to +150°C 0.15 25-35 --- 2701/50 50 -55°C to +150°C 0.15 25-35 --- 2701/250 250 -55°C to +150°C 0.15 25-35 86-72/50** 272/50 50 -55°C to +230°C 0.30 25-35 86-72/250** 272/250 250 -55°C to +230°C 0.30 25-35 Function 28-10/75 573/50 1) 75 -55°C to +150°C 0.30 2-4 28-10/250 573/250 250 -55°C to +150°C 0.30 2-4 58-14/75 574/50 1) 75 -55°C to +150°C 0.50 5-8 58-14/250 574/250 250 -55°C to +150°C 0.50 5-8 58-31/75 518/65 2) 75 -55°C to +180°C 0.50 7-10 58-31/250 518/300 3) 250 -55°C to +180°C 0.50 7-10 59-20/310 510/300 3) 310 -55°C to +180°C 3.0 1.8-3 * Similar properties, see page 555 and on for technical data or request that information from us 1) Packing 50 ml, 2) Packing 65 ml, 3) Packing 300 ml Loxeal and thread seals Loxeal and screw-type locker Loxeal and face seals Loxeal and joint connections Outstanding value! Outstanding value! Outstanding value! Tube seal up to 2“ with PTFE, approved for gas (DVGW) and drinking water (KTW, WRAS) Flexible seal to 1 1 / 2 “, approval for gas (DVGW) and water (KTW) Tube seal up to 3“ moderately stiff, approved for gas (DVGW up to 2“), water (WRAS) and oxygen (BAM) Tube seal up to 3 / 4 “ moderately stiff for hydraulic and pneumatic fittings, approved for gas (DVGW) Packing ml Temperature range Max. gap mm Break-out torque Nm Type Loxeal Type Loctite * High-strength up to M 20 for moun- ting bolts, nuts and pins. High-strength to M 56, high temperature resistant, approved for gas (DVGW) Flexible for precise connections On a silicone basis, oil resistance, for large gap filling Hardens quickly, resistant to strong vibrations Flexible to fill medium gaps High-strength up to M56 screw and thread sealant for stainless steel and passive materials without the use of an activator Medium strength to M 36, for oily surfaces, approved for gas (DVGW) and water (WRAS) Low strength to M 24, vibration resistant Packing ml Temperature range Max. gap mm Break-out torque Nm Type Loxeal Type Loctite * Packing ml Temperature range Max. gap mm Tensile strength N/mm 2 Type Loxeal Type Loctite * Packing Function 53-11/50 641/50 50 ml -55°C to +150°C 0.12 8-12 removable 82-33/50 603/50 50 ml -55°C to +150°C 0.10 17-22 82-33/250 603/250 250 ml 83-21/10 648/10 10 ml -55°C to +175°C 0.12 25-35 83-21/50 648/50 50 ml 83-21/250 648/250 250 ml 89-51/75 660/50 1) 75 ml -55°C to +150°C 0.50 25-30 * Similar properties, see page 556 and on for technical data or request that information from us 1) Packing 50 ml Renewal of worn shafts and threads High-strength, fast hardening Approved for oxygen (BAM) For fits with oily surfaces Temperature range Max. gap mm Pressure shearing resistance N/mm² Type Loxeal Type Loctite * Outstanding value! High-strength sealant up to 2“, approved for gas (HSE) and drinking water (KTW), Loctite without approvals * similar properties, technical date see starting on page 554 or request this from us ** can also be used as thread sealing *** can also be used as joint connection 552 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl