APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 9 Accessories for compressed air tools Swivel joints with male and female threads 360° rotatable Suitable: For slow rotary movements, e.g. to avoid the twi- sting of hoses. Materials: Steel nickel-plated Temperature range: 0°C to max. +60°C Operating pressure: 0 - 15 bar, media: Compressed air 360° rotatable 360° rotatable 360° rotatable type with plug NW 7 90° pivotable Type Precision version DREHGELENK 14 R 1 / 4 “ (con) R 1 / 4 “ 3-way DREHGELENK 38 R 3 / 8 “ (con) R 3 / 8 “ 2-way DREHGELENK 12 R 1 / 2 “ (con) R 1 / 2 “ 2-way Standard version DREHGELENK 14 B Rp 1 / 4 “ R 1 / 4 “ 2-way Swivel joints with male and female threads 360° rotatable Suitable: For reduced rotary movements, e.g. connection to compressed air tools, especially for suspended compres- sed air tools. Materials: Brass nickel-plated/plastic Temperature range: 0°C to max. +60°C Operating pressure: 0 - 15 bar, media: Compressed air 360° rotatable 360° rotatable 360° rotatable 360° rotatable 360° rotatable precision version standard version Spring balancers Type Extension length Capacity Lightweight design, outstanding value TW 06 R 1.5 m 0.2 - 0.6 kg TW 1 R 1.5 m 0.5 - 1.5 kg TW 2 R 1.5 m 1 - 2 kg Standard RW 0 2.0 m 0.5 - 1.5 kg RW 3 2.0 m 1 - 3 kg RW 5 2.0 m 2.5 - 5 kg lightweight design standard Application: In the case of spring balancers, the cable force increases as the cable is extended. After being used, the load (e.g. a tool) is retracted to its original position using the spring balancer. This makes it possible to supply workstati- ons with power wrenches or other tools from above, thus maintaining a free workspace. The tension can be regulated with ease using the knob. Balancers Type Extension length Capacity Cable balancer, aluminium housing TW 00 0.5 m 0.5 - 1.5 kg TW 0 1.0 m 0.5 - 1.5 kg TW 3 1.3 m 1 - 3 kg TW 5 1.3 m 2.5 - 5 kg TW 9 1.3 m 4.5 - 9 kg TW 15 1.3 m 9 - 15 kg TW 22 1.5 m 15 - 22 kg TW 30 1.5 m 22 - 30 kg TW 40 1.5 m 30 - 40 kg TW 50 1.5 m 40 - 50 kg TW 60 1.5 m 50 - 60 kg TW 70 1.5 m 60 - 70 kg Hose balancer, plastic housing (max. 10 bar, temperature range: -10°C to max. +40°C) HW 0 1.3 m 0.5 - 1.5 kg HW 3 1.3 m 1.5 - 3 kg HW 5 1.3 m 3 - 5 kg cable balancer hose balancer for com- pressed air tools Application: In the case of cable balancers, the cable force remains virtually identical across the entire length of the cable. The load (e.g. a tool) is not retracted by means of spring force but remains at its current position instead. Because the cable force does not change noticeably, it is possible to carry out very precise and delicate work even with heavy tools. Using balancers makes work less tiring even over longer periods of time and with heavy loads. The hose balancers combine the properties of a cable balancer with those of a hose reel. In this case, the load is maintained by the hose in- stead of a cable. The hose 6.5 x 10 (interior x exterior) is equipped with a male thread R 1 / 4 “ and the compressed air is supplied via a female thread Rp 1 / 4 “. Type Thread Connection DG 1414 IA G 1 / 4 “ (FT) R 1 / 4 “ (MT) DG 3838 IA G 3 / 8 “ (FT) R 3 / 8 “ (MT) DG 14 KSNW7* G 1 / 4 “ (MT) Plug NW 7.2 * 50° pivotable Threaded nozzles from page 64 Coupling sockets NW7 from page 150 Coil tubes assembled with couplings from page 200 Compressed air and water hoses from page 208 Thread female Thread male Version 360° rotatable APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 541