APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 9 Grease presses/pumps Grease presses for 400 g grease cartridges* DIN 1283 Type Version Connection Figure Grease press assembly FEPR R Grease press with tube and coupling R 1 / 8 “ Press incl. 1 FEPR S Grease press with hose (300 mm) and coupling R 1 / 8 “ Press incl. 2 FEPR RS Grease press with tube, hose (300 mm) and coupling R 1 / 8 “ Press incl. 1 & 2 Replacement parts FEPR ROHR Tube (150 mm) R 1 / 8 “ (MT) 1 FEPR SCHL 200 Hose (200 mm) R 1 / 8 “ (MT) 2 FEPR SCHL 300 Hose (300 mm) R 1 / 8 “ (MT) 2 FEPR SCHL 500 Hose (500 mm) R 1 / 8 “ (MT) 2 FEPR SCHL 200 OK Hose (200 mm) without coupling R 1 / 8 “ (MT) 3 FEPR SCHL 300 OK Hose (300 mm) without coupling R 1 / 8 “ (MT) 3 FEPR SCHL 500 OK Hose (500 mm) without coupling R 1 / 8 “ (MT) 3 FEPR KUP 18 Coupling with 4 cheeks for ball grease nipple G 1 / 8 “ (FT) 4 FEPR KUPD 18 Coupling as nozzle for funnel type grease nipple G 1 / 8 “ (FT) 5 FEPR KUPFL 10 Coupling for flat grease nipple, 10 mm G 1 / 8 “ (FT) 6 FEPR KUPFL 16 Coupling for flat grease nipple, 16 mm G 1 / 8 “ (FT) 6 FEPR KUPFL 22 Coupling for flat grease nipple, 22 mm G 1 / 8 “ (FT) 6 FEPR KUPFL 16 O Open coupling for flat grease nipple, 16 mm G 1 / 8 “ (FT) 7 * max. 240 x 56 mm, suitable for 215 x 50 mm cartridges (DIN 1284) or 500 ml loosely filled 5 6 7 1 2 3 type press Electric barrel pumps for low viscosity media Type Drum thread FP 40 40 M 64 x 4/G 2“ No FP 40 A 35 M 64 x 4/G 2“ Yes * construction type approved Version: With suction hose and filter for immersion depths up to 1600 mm, suction stage with integrated lever protec- tion, discharge hose 4 m DN 19 x 4 bend protection spring and standard nozzle Media: Diesel, heating oil EL/L and anti-freeze (undiluted) Voltage: 230V AC (Schuko-Plug) Motor power: 250 Watt Protection class: IP 44 Optional: Digital counter (not appropriate for verification) -Z F Order example: FP 40 ** Designation for the options: Digital counter (not appropriate for verification) -Z F Standard type Electric barrel pumps for high viscosity media Type Drum thread FP 25 25 G 2“ No * construction type approved Version: Self-priming, with suction tube for immersion depths up to 840 mm, 4 m discharge hose DN 19 x 4 and oil nozzle Media: Engine and transmission oil SAE 80, hydraulic oil, (viscosity 100 - 2000 mPa*s) Voltage: 230V AC (Schuko-Plug) Motor power: 740 Watt Protection class: IP 54 Optional: Digital counter (not appropriate for verification) -Z F Order example: FP 25 ** Designation for the options: Digital counter (not appropriate for verification) -Z F Standard type type FP 40 type FP 40 A Replacement gun FP 40 Pi FP 40 A Pi Option: With digital counter Hand lever barrel pumps for low viscosity media Type Drum thread FPH 30 0.3 G 2“/S 56 x 4/S 70 x 6 Version: Robust, chemical-resistant, self-priming lever pump for bottling from 200 - 225 l barrels, pump body made of PP with FKM seals, 3-part telescopic suction pipe (500 - 900 mm in length) and integrated barrel screw connection for G 2" (standard barrel thread with FKM seal), S 56 x 4 (triSure with SANTOPREN seal) and S 70 x 6 (mauser with EPDM seal). Media: Water, diesel, biodiesel, heating oil, AdBlue, acids, alkalis Oil binding agents & oil binding cloths from page 581 Flow-rate l/stroke Flow-rate l/min. Autom. nozzle* Flow-rate l/min. Autom. nozzle* APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 539