APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 9 Blow guns/nozzles Type Connection WONDER GUN G 1 / 4 “ Suction blow guns "WONDER GUN" This new type of suction blow gun makes absolutely no compromises on cleanliness in the factory. With a traditional blow gun, dirt unnecessarily spreads across the factory and the chippings flying all over pose a significant risk of injury. The WONDER GUN on the other hand, sucks chippings and collects them directly into a connected reusable container. A simple change of the control nozzle can change the function of the pistol from suction to blowing. By doing so, up to 75% of energy is saved using the Venturi-principle. Supply volume: Ÿ Guns incl. hose and collection container Ÿ Nozzle set consisting of round, flat, brush and mini nozzles Filter sets WONDER GUN REP Materials: Body: Brass or aluminium, pusher and nozzle: Zinc-plated steel Temperature range: -20°C to max. +100°C Version: Sturdy blower tap for harsh operating conditions. Nozzle connection: G 3 / 8 “ (FT) Type Length Weight Connection BLP AUSBLASSTIFT 116 mm 25 g NW 7.2 coupling plug* * standard coupling Blow-out pens with clips PN 12 Continuously adjusted airflow adjustment of closed to max. flow by means of convenient one-handed operation, connec- tion with push-in nipple for NW 7.2 couplings Materials: Housing: Aluminium anodised, seals: NBR Temperature range: -10°C to max. +60°C Flow: Max. 300 l/min at 6 bar Nozzle Ø: Controllable (0 - 3 mm) Connection With female thread --- BLPG 14 A G 1 / 4 “ female thread With hose connection BLPG 6 MS --- 6 mm hose connection BLPG 9 MS --- 9 mm hose connection BLPG 13 MS --- 13 mm hose connection With coupling plug --- BLPG KS A NW7.2 NW 7.2 coupling plug* * standard coupling Brass blow guns with short nozzles PN 12 Type BLP DR 20 G 1 / 4 “ 1.5/2.0/2.5 BLP DR 30 G 1 / 4 “ 2.2/2.9/3.5 BLP DR 40 G 1 / 4 “ 2.8/3.7/4.5 BLP DR 50 G 1 / 4 “ 3.5/4.6/5.4 1) ± 0.6, 2) ± 0.5 bar, 3) ± 0.2 bar Pressure reducing valves for blow guns Materials: Housing: Brass, seal: NBR Input pressure: Max. 15 bar Advantages: Ÿ Tool machines are not damaged, since chipping is not depressed in sensitive areas (seals, lathe chuck, machine bed, etc.) Suitable: Only for compressed air i n put pressure m ax. 15 bar output pressure 2-8 bar ü Type BLP DR 60 G 1 / 4 “ 3.8/5.0/6.0 BLP DR 70 G 1 / 4 “ 4.8/6.2/7.3 BLP DR 80 G 1 / 4 “ 5.5/7.3/8.2 Coupling sockets NW7 from page 150 Hose clamps from page 234 Coil tubes assembled with couplings from page 200 PVC fabric hoses on page 208 Saves air - protects machine A clean solution Thread (FT/MT) Output pressure at input pressure 5 bar 1) /10 bar 2) /15 bar 3) Thread (FT/MT) Output pressure at input pressure 5 bar 1) /10 bar 2) /15 bar 3) Type aluminium Type brass Fits in every pocket TIP APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 527