APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 8 Guide cylinders Guide via ball bushings Guide cylinders for accepting lateral forces Materials: Body and plate: Aluminium anodised, guide rods: Steel hard chrome-plated, piston rod: Steel hard chrome- plated, piston: Aluminium with magnet insertion, seal: NBR/PUR Temperature range: -20°C to max. +80°C Operating pressure: Max. 10 bar Stroke ZDFM 50/25 G ZDFM 63/25 G ZDFM 80/25 G ZDFM 100/25 G 25 ZDFM 50/50 G ZDFM 63/50 G ZDFM 80/50 G ZDFM 100/50 G 50 ZDFM 50/75 G ZDFM 63/75 G ZDFM 80/75 G ZDFM 100/75 G 75 ZDFM 50/100 G ZDFM 63/100 G ZDFM 80/100 G ZDFM 100/100 G 100 ZDFM 50/150 G ZDFM 63/150 G ZDFM 80/150 G ZDFM 100/150 G 150 ZDFM 50/200 G ZDFM 63/200 G ZDFM 80/200 G ZDFM 100/200 G 200 Stroke ZDFM 16/10 G --- --- --- --- 10 ZDFM 16/20 G ZDFM 20/20 G ZDFM 25/20 G --- --- 20 --- --- ZDFM 25/25 G ZDFM 32/25 G ZDFM 40/25 G 25 ZDFM 16/30 G ZDFM 20/30 G ZDFM 25/30 G --- --- 30 ZDFM 16/40 G ZDFM 20/40 G ZDFM 25/40 G --- --- 40 ZDFM 16/50 G ZDFM 20/50 G ZDFM 25/50 G ZDFM 32/50 G ZDFM 40/50 G 50 ZDFM 16/75 G ZDFM 20/75 G ZDFM 25/75 G ZDFM 32/75 G ZDFM 40/75 G 75 --- ZDFM 20/100 G ZDFM 25/100 G ZDFM 32/100 G ZDFM 40/100 G 100 --- ZDFM 20/150 G ZDFM 25/150 G ZDFM 32/150 G ZDFM 40/150 G 150 --- ZDFM 20/200 G ZDFM 25/200 G ZDFM 32/200 G ZDFM 40/200 G 200 Guide through self-lubricating slide bearings Stroke ZDFM 50/25 K ZDFM 63/25 K ZDFM 80/25 K ZDFM 100/25 K 25 ZDFM 50/50 K ZDFM 63/50 K ZDFM 80/50 K ZDFM 100/50 K 50 ZDFM 50/75 K ZDFM 63/75 K ZDFM 80/75 K ZDFM 100/75 K 75 ZDFM 50/100 K ZDFM 63/100 K ZDFM 80/100 K ZDFM 100/100 K 100 ZDFM 50/150 K ZDFM 63/150 K ZDFM 80/150 K ZDFM 100/150 K 150 ZDFM 50/200 K ZDFM 63/200 K ZDFM 80/200 K ZDFM 100/200 K 200 Stroke ZDFM 16/10 K --- --- --- --- 10 ZDFM 16/20 K ZDFM 20/20 K ZDFM 25/20 K --- --- 20 --- --- ZDFM 25/25 K ZDFM 32/25 K ZDFM 40/25 K 25 ZDFM 16/30 K ZDFM 20/30 K ZDFM 25/30 K --- --- 30 ZDFM 16/40 K ZDFM 20/40 K ZDFM 25/40 K --- --- 40 ZDFM 16/50 K ZDFM 20/50 K ZDFM 25/50 K ZDFM 32/50 K ZDFM 40/50 K 50 --- ZDFM 20/75 K ZDFM 25/75 K ZDFM 32/75 K ZDFM 40/75 K 75 --- ZDFM 20/100 K ZDFM 25/100 K ZDFM 32/100 K ZDFM 40/100 K 100 --- ZDFM 20/150 K ZDFM 25/150 K ZDFM 32/150 K ZDFM 40/150 K 150 --- ZDFM 20/200 K ZDFM 25/200 K ZDFM 32/200 K ZDFM 40/200 K 200 Pressure-force tables can be found on page 3 Piston Ø 16 mm Piston Ø 20 mm Piston Ø 25 mm Piston Ø 32 mm Piston Ø 40 mm Piston Ø 50 mm Piston Ø 63 mm Piston Ø 80 mm Piston Ø 100 mm Piston Ø 16 mm Piston Ø 20 mm Piston Ø 25 mm Piston Ø 32 mm Piston Ø 40 mm Piston Ø 50 mm Piston Ø 63 mm Piston Ø 80 mm Piston Ø 100 mm type ZSA 12 1 3 4 M 8-Plug 5 6,1 4,5 28,5 M 3 x 5 (SW 1,8) LED g elb 200 3 5 6,1 4,5 28,5 3000 3 M 3 x 5 (SW 1,5) LED g elb BN/BR + (~) - (~) BU/BL 1 4 AC/DC BN/BR BK/SW AC/DC + - (~) - +(~) BU/BL 1 4 3 BN/BR BK/SW DC + - BU/BL 1 4 3 Type Switching 2-wire reed sensor ZSA 12 10-230V AC NO contact 150 mA/10 W 3 m, 2 x 0.14 mm 2 10-170V DC ZSA 12-M8 10-60V AC NO contact 150 mA/10 W 0.2 m, 2 x 0.14 mm 2 10-75V DC With cable plug M 8 3-wire reed sensor ZSA 13 10-30V AC/DC NO contact (PNP)500 mA/10 W 3 m, 3 x 0.14 mm 2 ZSA 13-M8 10-30V AC/DC NO contact (PNP)500 mA/10 W 0.2 m, 3 x 0.14 mm 2 With cable plug M 8 fully electronic sensor (reverse polarity protection) ZSA 33 10-30V DC NO contact (PNP)130 mA/4 W 3 m, 3 x 0.14 mm 2 ZSA 33-M8 10-30V DC NO contact (PNP)130 mA/4 W 0.2 m, 3 x 0.14 mm 2 With cable plug M 8 Cylinder switches for cylinders with continuous T-groove Materials: Body: Plastic, threaded part: Brass, screw: Stainless steel. Connecting line: PUR cable Advantages: Ÿ No mounting material required. Protection class: IP 67 Ÿ Only one switch for many cylinders Temperature range: -20°C to max. +70°C Note: The proximity switch with light emitting diode is used for the contactless position indicator of cylinders with magnetic pistons. It is mounted by pushing it in the T-groove of the cylinder and locking it using the threaded rod. Suitable: For cylinder ISO 15552: XL/XLE, compact cylinder: NXE/NXD compact cylinder ISO 21287: NAE/NAD/SFS, rodless cylinder: LZ (Ø 18 mm only with clamp ZSAB2 5), guide cylinder: ZDFM and other cylinders with continuous T-groove ZSA 12/ZSA 12-M8 ZSA 13/ZSA 13-M8 ZSA 33/ZSA 33-M8 PUR connection line Max. switching current/performance Operating voltage ü 494 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl