APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 8 Cylinders ISO 15552- accessories ZSE1 8/25 8 - 25 --- --- ZSE1 32/80 --- 32 - 80 32 - 80 ZSE1 80/125 --- 80 - 125 80 - 125 Tension bands for electronic cylinder switch type ZSE 33 Pneumatic cylinder switches for round cylinders Material: Plastic Temperature range: -15°C to max. +60°C Media: Unoiled, filtered compressed air Application: The cylinder switch is a 3/2-way valve controlled via the magnetic piston of a cylinder. It can be used to control pneumatic circuits, where it is very difficult to design and fit a limit switch. In contrast to a pneumatic sensor fitting (Page 431), similar to an electric cylinder switch, a pneumatic cylinder switch allows querying the exact position of the piston and need not be positioned in the end position. Type Hose connection ZS PNEU 2-6 bar 2 mm Push in nipple for hose Ø 3 mm (interior) ZS PNEU SP 1 3 2 Type Protection class Switching ZSE 33 10-30V DC IP67 NO contact (PNP) 200 mA Max. 10 m/s Electronic cylinder switches for stainless steel cylinders Materials: PA12 + 30% GF (corrosion and acid resistant) Connecting line: 2 m PUR/PVC cable, cross section: 3 x 0.25 mm 2 Temperature range: -25°C to max. +70°C Optional: Design as 2-wire NAMUR switch (for use in EX areas)* -NAMUR Note: The electronic proximity switch with integrated protection circuit and light emitting diode is used for the contactless position indicator of cylinders with magnetic pistons. It is equipped with cycling short-circuit protection and a reverse po- larity protection. The mounting is done using ES tension bands, which must be ordered as accessories (see below). Suitable: For all stainless steel cylinders F Designation for the options: 2-wire NAMUR switch Acc. to ATEX* II 2G EEx ia IIC T4 ... T6 . . . -NAMUR Order example: ZSES ** Standard type F * for use in EX areas, the NAMUR switch must be connected to an approved switch isolator. Please ask us! BN/BR BK/SW DC + - BU/BL 1 4 3 Type For profile thickness ZSC2 32/63 32 - 63 mm 4 - 8 mm ZSC2 80/125 80 - 125 mm 8 - 12 mm ZSC2 160/200 160 - 200 mm 12 -15 mm Fixing clamps for cylinder switch type ZSC 33/ZSC 12 Material: Aluminium anodised Suitable: For mounting cylinder switches type ZSC 33 and ZSC 12 on profile tube or tension anchor cylinders. Overrun speed Max. switching current Operating voltage Used for cylinder Ø ISO 6432 (small cylinder) Operating pressure Nominal width Used for cylinder Ø ISO 15552 (VDMA) Used for cylinder Ø ISO 6431 (standard) Type tension band to Ø 100 mm Type AISI 304 For cylinder Ø Type Type straight angled Cable length KAB M8 1 G KAB M8 1 W 1 mtr. KAB M8 3 G KAB M8 3 W 3 mtr. KAB M8 5 G KAB M8 5 W 5 mtr. KAB M8 10 G KAB M8 10 W 10 mtr. Connection lines M 8 (3 pin) Description: Pre-fabricated connection lines with 3-pin M8 socket (M8 x1 female thread acc. to DIN EN 61076-2-104) on one side and 3 loose cable ends on the other side. Temperature range: -25°C to max. +90°C Voltage: max. 60V AC/DC, max. 4 A Protection class: IP 67 Cable: PUR cable, 3 x 0,34 mm² Cable layout: PIN 1 - brown, PIN 3 - blue, PIN 4 - black Suitable: These cables are used preferentially for the connection of cylinder switches, inductive proximity switches or so- lenoid valves. Warning! They are not compatible with the (e.g. used frequently for light barriers) 4-pin M8 cable connec- tors. 3 1 M 8 - Socket 4 Zu g a n ker-Ø 478 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl