APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 8 Cylinders ISO 15552 - accessories Type For profile thickness S ZSAB1 32/40 (32 - 40 mm) 8 - 10 mm ZSAB1 50/63 (50 - 63 mm) 11 - 13 mm ZSAB1 80/100 (80 - 100 mm) 14 - 16 mm Fixing clamps for cylinder switches (T-groove) for Mickey-Mouse profile (TM/TME) Material: Aluminium anodised Suitable: For mounting cylinder switches type ZSA 12, 12-M8, 13, 13-M8, 33, 33-M8 on profile tube cylinders. S type ZSA 12 1 3 4 M 8-Plug 5 6,1 4,5 28,5 M 3 x 5 (SW 1,8) LED g elb 200 3 5 6,1 4,5 28,5 3000 3 M 3 x 5 (SW 1,5) LED g elb BN/BR + (~) - (~) BU/BL 1 4 AC/DC BN/BR BK/SW AC/DC + - (~) - +(~) BU/BL 1 4 3 BN/BR BK/SW DC + - BU/BL 1 4 3 Type Switching 2-wire reed sensor ZSA 12 10-230V AC NO contact 150 mA/10 W 3 m, 2 x 0.14 mm 2 10-170V DC ZSA 12-M8 10-60V AC NO contact 150 mA/10 W 0.2 m, 2 x 0.14 mm 2 10-75V DC With cable plug M 8 3-wire reed sensor ZSA 13 10-30V AC/DC NO contact (PNP)500 mA/10 W 3 m, 3 x 0.14 mm 2 ZSA 13-M8 10-30V AC/DC NO contact (PNP)500 mA/10 W 0.2 m, 3 x 0.14 mm 2 With cable plug M 8 fully electronic sensor (reverse polarity protection) ZSA 33 10-30V DC NO contact (PNP)130 mA/4 W 3 m, 3 x 0.14 mm 2 ZSA 33-M8 10-30V DC NO contact (PNP)130 mA/4 W 0.2 m, 3 x 0.14 mm 2 With cable plug M 8 Cylinder switches for cylinders with continuous T-groove Materials: Body: Plastic, threaded part: Brass, screw: Stainless steel Connecting line: PUR cable Protection class: IP 67 Temperature range: -20°C to max. +70°C Note: The proximity switch with light emitting diode is used for the contactless position indicator of cylinders with magnetic pistons. It is mounted by pushing it in the T-groove of the cylinder and locking it using the threaded rod. Suitable: For cylinder ISO 15552: XL/XLE, compact cylinder: NXE/NXD compact cylinder ISO 21287: NAE/NAD/SFS, rodless cylinder: LZ (Ø 18 mm only with clamp ZSAB2 5), guide cylinder: ZDFM and other cylinders with continuous T-groove Advantages: Ÿ No mounting material required. Ÿ Only one switch for many cylinders ü ZSA 12/ZSA 12-M8 ZSA 13/ZSA 13-M8 ZSA 33/ZSA 33-M8 20 D 20 Type Clamping range (D) ZSC1 8/25 8 - 25 mm 10 - 30 mm ZSC1 32/63 32 - 63 mm 30 - 70 mm ZSC1 80/100 80 - 100 mm 70 - 110 mm ZSC1 125/200 125 - 200 mm 110 - 230 mm Tension bands for cylinder switch type ZSC 33/ZSC 12 Materials: Tape: AISI 304, clamping block: Aluminium Suitable: For mounting cylinder switches type ZSC 33 and ZSC 12 on round cylinders. PUR connection line Max. switching current/performance Operating voltage Suitable for cylinder Ø For cylinder Ø 40 12 8 1 3 4 M 8-Plug Type Switching 2-wire reed sensor, red LED ZSC 12 10-250V AC/DC NO contact 500 mA/20W 3 m, 2 x 0.25 mm 2 ZSC 12-M8 10-60V AC/10-75V DC NO contact 500 mA/20W Cable plug M 8 Fully electronic sensor (reverse polarity protection/short circuit proof), yellow LED ZSC 33 10-30V DC NO contact (PNP)200 mA 3 m, 3 x 0.25 mm 2 ZSC 33-M8 10-30V DC NO contact (PNP)200 mA Cable plug M 8 Cylinder switches for round cylinders and Mickey-Mouse profiles (TM/TME) Material: PEI smoke Connecting line: PVC cable Protection class: IP 67 Temperature range: -25°C to max. +75°C Note: The proximity switch with light emitting diode is used for the contactless position indicator of cylinders with magne- tic pistons. The mounting is done by fixing clamps or tension bands, which must be ordered as accessories (see below). Suitable: For ISO-15552 cylinder model series TM/TME (mounting using fixing clamps), round cylinders model series ZDM/ZDPM (Ø 8 - 25 mm), DSWPVM (Ø 32 - 63 mm) (mounting using tension bands) and other tie rod cylinders (mounting using fixing clamps or tension bands) Especially good value! BN/BR + - (~) - +(~) BU/BL 1 4 AC/DC BN/BR BK/SW DC + - BU/BL 1 4 3 Electrical connection Max. switching current/performance Operating voltage APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 477