APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 7 OR valves Type Connection Flow Precision design OR 25 M 5 3.2 mm 160 l/min. OR 18 G 1 / 8 “ 4.0 mm 280 l/min. OR 03 Push-in hose 4.3 x 3 2.5 mm 120 l/min. OR 04 Push-in hose 6 x 4 3.0 mm 150 l/min. Standard design OR 18 B G 1 / 8 “ 6.5 mm 500 l/min. OR 14 B G 1 / 4 “ 8.0 mm 1,200 l/min. Materials: Body: Aluminium anodised, internal parts: Brass and stainless steel (standard design: brass and plastic), seals: NBR Temperature range: -10°C to max. +70°C (standard design: max. +60°C) Media: Oiled and unoiled filtered compressed air Operating pressure: -0.95 to 10 bar (standard design: 2 to 10 bar) Function: A signal appears at outlet A, only if on inlet X or Y there is a signal. If signals are positioned at both inlets, then the higher pressure will reach outlet A. The OR member has no separate venting as a passive element. After deleting both input signals ventilation occurs via the upstream signal members. Y X A precision design standard design Suitable for vacuum Logic valves/quick venting valves Quick exhaust valves Type Precision design SE 18 G 1 / 8 “ G 1 / 8 “ G 1 / 4 “ 600 l/min. 1,200 l/min. SE 14 G 1 / 4 “ G 1 / 4 “ G 3 / 8 “ 1,200 l/min. 2,400 l/min. SE 12 G 1 / 2 “ G 1 / 2 “ G 3 / 4 “ 2,800 l/min. 5,600 l/min. Standard design SV 25 M5 M5 M5 220 l/min. 300 l/min. SV 18 G 1 / 8 “ G 1 / 8 “ G 1 / 8 “ 650 l/min. 1,100 l/min. SV 14 G 1 / 4 “ G 1 / 4 “ G 1 / 4 “ 1,200 l/min. 2,250 l/min. SV 38 G 3 / 8 “ G 3 / 8 “ G 3 / 8 “ 1,200 l/min. 2,250 l/min. SV 12 G 1 / 2 “ G 1 / 2 “ G 1 / 2 “ 3,200 l/min. 7,400 l/min. SV 34 G 3 / 4 “ G 3 / 4 “ G 3 / 4 “ 3,800 l/min. 14,000 l/min. SV 10 G 1“ G 1“ G 1“ 6,280 l/min. 15,900 l/min. --- --- --- SV 25 MEMBRANE SV 18 MEMBRANE SV 1438 MEMBRANE SV 1438 MEMBRANE SV 12 MEMBRANE SV 34 MEMBRANE SV 10 MEMBRANE Precision design: Materials: Body: Aluminium anodised, seals: NBR Temperature range: -10°C to max. +70°C Operating pressure: 0.5 to 10 bar Media: Oiled and unoiled filtered compressed air Standard design: Materials: Body: Brass nickel-plated, seals: NBR/Polyurethane Temperature range: -20°C to max. +70°C Operating pressure: 1 to 10 bar Media: Oiled and unoiled filtered compressed air Optional: FKM seal (-20°C to max. +150°C) -V Function: These valves are used to vent the cylinders quickly and enhance the cylinder speed. For this, they are screwed directly on the cylinder using the connection A. Working: The air flowing through the control valve can flow continuously from connection P to the connection A. Exhaust: When the control valve switches over to venting, P becomes depressurised. The valve switches to flow from A to R and the air from the cylinder can be freely vented into the open. Warning! Only for use in cylinders where there is sufficient end position damping (adjustable cushion, shock absorber). When using a silencer in connection R, this must be large enough to avoid dynamic pressure (we recommend using our silencer as of page 436). F precision design standard design P R A R A P Designation for the option: FKM seal (not for M5) . . . . . . . . -V Order example: SV 12 ** Standard type F Silencers from page 436 Push-in fittings Ø 3 - 32 mm from page 24 PU, PA, PTFE and PE hoses from page 192 Hose terminal strip and sockets from page 247 PU, PA, PTFE and PE hoses from page 192 Ball valves from page 280 Replacement diaphragms Connect. A Connect. P Connect. R Breathing P → A Venting A → R Nominal width Contact us for technical details Contact us for Festo screwed connections Contact us for Festo valves APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 435