APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 7 Tilt lever valves Application: To actuate single acting cylinders, screw the 3/2-way valve (K 3...) directly in the cylinder. 2/2-way and 3/2-way tilt lever valves K 25 K 35 M5 M5 M5 3 3 1 2 K 21864 K 31864 KO 31864 6 x 4 G 1 / 8 “ K 21886 K 31886 KO 31886 8 x 6 G 1 / 8 “ K 21464 K 31464 KO 31464 6 x 4 G 1 / 4 “ K 21486 K 31486 KO 31486 8 x 6 G 1 / 4 “ K 214108 K 314108 KO 314108 10 x 8 G 1 / 4 “ 2/2-way and 3/2-way valves with CK connection K 21804 K 31804 KO 31804 4 G 1 / 8 “ K 21806 K 31806 KO 31806 6 G 1 / 8 “ K 21406 K 31406 KO 31406 6 G 1 / 4 “ K 21408 K 31408 KO 31408 8 G 1 / 4 “ K 214010 K 314010 KO 314010 10 G 1 / 4 “ Thread female K 21818 K 31818 KO 31818 G 1 / 8 “ G 1 / 8 “ K 21414 K 31414 KO 31414 G 1 / 4 “ G 1 / 4 “ 1) choice of compressed air supply at the screw-in thread or banjo. 3 3 2/2-way and 3/2-way valves with push-in fitting 2/2-way and 3/2-way valves with female threads 2/2-way and 3/2-way valves with M 5 threads Materials: Body: Brass nickel-plated, internal parts: Brass/stainless steel, seal: NBR Temperature range: -5°C to +70°C Operating pressure: 0 to 10 bar (M5: 8 bar) Media: Filtered compressed air, neutral gases Required mounting hole for panel mounting: Ø 12.0 mm, maximum sheet metal thickness: 4 mm Advantages: Ÿ Economical price Ÿ Extensive operating options Ÿ Simple, quick assembly of a circuit 2/2-, 3/2- and 4/2-way tilt lever valves Application: To actuate double-acting cylinders, use the valve directly in a connection of the cylinder. Using the hose, connect the upper banjo with the other connection of the cylinder. The valve is supplied with compressed air by means of the lower banjo. 4/2-way tilt lever valves Type K 41464 6 x 4 G 1 / 4 “ K 41486 8 x 6 G 1 / 4 “ K 414108 10 x 8 G 1 / 4 “ 4/2-way valves with CK connection Type K 41406 6 G 1 / 4 “ K 41408 8 G 1 / 4 “ K 414010 10 G 1 / 4 “ Type K 41414 G 1 / 4 “ G 1 / 4 “ 4/2-way valves with push-in fitting 4/2-way valves with thread female ü type with CK connection type with push-in fittings 2 1 2 1 3 2 1 2 1 3 2 1 2 1 3 2 1 2 1 3 Type 3/2-way pressure input: thread Type 3/2-way pressure input: banjo Type 2/2-way 1) Type 2/2-way Type 3/2-way Screw-in thread (MT) 1 (input) thread female 2 (output) thread female 3 (venting) thread female Push-in hose Ø external Hose connection Ø external x internal Thread female Hose connection Ø external x internal Push-in hose Ø external Type 3/2-way pressure input: thread Type 3/2-way pressure input: banjo Type 2/2-way 1) Screw-in thread (MT) Type 3/2-way pressure input: thread Type 3/2-way pressure input: banjo Type 2/2-way 1) Screw-in thread (MT) Screw-in thread (MT) Screw-in thread (MT) Screw-in thread (MT) APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 427