APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 6 Plug-on displays/pressure switches Type Description DAA 4 Four digit LCD plug-on display for gauge transducer, character height: 10 mm Digital plug-on displays for pressure gauge transducers (LCD) Materials: Housing: ABS, front window: Polycarbonate Temperature range: 0°C to max. +50°C Protection class: IP 65 Electrical connection: A transmitter with 4-20 mA outlet in a 2-wire system and elbow plug DIN 43650/EN 175301-803 (size 3, 4-pin) Conversion rate: 5 meas./sec. Display accuracy: ± 0.2% of the span, ± 1 digit Programming: Using 3 keys under the housing face plate, menu guided: Scaling of the display area, decimal point, cushioning Dimensions: Front frame: 49 x 49 mm, depth: 35.5 mm Type Input voltage Output Nominal performance S8VS01524 100 - 240V AC 24V DC (max. 650 mA) 15 W Switch power supply for power supply of the pressure gauge transducer and digital displays Function: Stabilised output voltage 24V DC, housing for standard rail assembly Electronic pressure switches up to 600 bar Materials: Body and thread connector: Stainless steel (AISI 304/316L), display: Plastic, measured material touching parts: Stainless steel (AISI 316L) Temperature range: -20°C to max. +80°C, measured material: Max. +85°C Protection class: IP 67 Supply voltage: 15-35V DC, 45 mA Electrical connection: Plug M12 (4-pin) Control output (PNP): 2 control outputs (contacts, break contacts, windows and 250 mA hysteresis can be freely adjusted for each control output), max. 250 mA Switching accuracy: ± 1% of the span Connection: G 1 / 4 “ MT (with elastomer seal) Service life: 100 million relay switches Advantages: Ÿ Easy-to-read, sturdy LED display Ÿ Intuitive and quick operation Ÿ Easily adjustable to various installation situations, e.g. by using a display that can be rotated 300° or digits that can be rotated 180° on the display Ÿ Thread connector equipped with elastomer seal Ÿ Honoured with the IF product design award Ÿ Password-protected menu navigation Optional: IO-Link communication standard for quicker installation and parametrisation -IO Type DRSEW -1 for vacuum -1 to 0 bar 2 bar DRSEW 1 0 - 1 bar 2 bar DRSEW 1,6 0 - 1.6 bar 3.2 bar DRSEW 2,5 0 - 2.5 bar 5 bar DRSEW 4 0 - 4 bar 8 bar DRSEW 6 0 - 6 bar 12 bar DRSEW 10 0 - 10 bar 20 bar DRSEW 16 0 - 16 bar 32 bar DRSEW 25 0 - 25 bar 50 bar DRSEW 40 0 - 40 bar 80 bar DRSEW 60 0 - 60 bar 120 bar DRSEW 100 0 - 100 bar 200 bar DRSEW 160 0 - 160 bar 320 bar DRSEW 250 0 - 250 bar 500 bar DRSEW 400 0 - 400 bar 800 bar DRSEW 600 0 - 600 bar 1200 bar 3 m cable, 4-wire with coupling, M12 x 1 KAB M12 3 G KAB M12 3 W 5 m cable, 4-wire with coupling, M12 x 1 KAB M12 5 G KAB M12 5 W 10 m cable, 4-wire with coupling, M12 x 1 KAB M12 10 G KAB M12 10 W M 12 - Plug 2 3 1 4 ü F Order example: DRSEW -1 ** Standard type F Designation for the options: IO-Link . . . . . . . . . . . . . -IO Liquid seals, gaskets & tapes from page 549 Type straight connector Type angled connector 90° Settings range Protected against overpressure to Cleaner and service products from page 564 Type Description Di 32-1 Digital display for installation into a panel cut-out 22.4 x 45.3 mm Universal built-in display and controller Materials: Housing and window: polycarbonate Temperature range: -20°C to max. +50°C Protection class: front side: IP 65 Input signals: Standard signals (0-20 mA, 4-20 mA, 0-50 mV, 0-1V, 0-2V and 0-10V), resistor thermometers (Pt100 and Pt1000), thermocouples (types K, J, N, T, S, R, B, E and L), frequency / speed (TTL and switch contact) Outputs: 2 switch contacts (not galvanised isolated, PNP, NPN or push-pull) Output functions: 2 point, 3 point, 2 point with alarm, min/max alarm together or separated, switch points user defined Conversion rate: Standard signal and frequency measurement: approx. 100 measurements/sec., temperature measure- ment: approx. 1 measurement per second Display accuracy: ±0.2% of the span for voltage signals Power supply: 9 - 28V DC Display: four-digit, red LED display, character height: 10 mm Dimensions: front frame: 24 x 48 mm, installation depth (with plug-in terminal): approx. 67 mm APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 391