APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 6 Air conditioning Cyclone separators Type Connection Thread female AG-Z 0125 G 1 / 2 “ 125 m³/h AG-Z 0225 G 3 / 4 “ 225 m³/h AG-Z 0375 G 1“ 375 m³/h AG-Z 0550 G 1 1 / 4 “ 550 m³/h AG-Z 0750 G 1 1 / 2 “ 750 m³/h AG-Z 1000 G 2“ 1000 m³/h AG-Z 1650 G 2 1 / 2 “ 1650 m³/h AG-Z 2250 G 3“ 2250 m³/h * for +20°C and 7 bar overpressure, for other pressures refer to conversion table on page 363 Cyclone separators are installed in order to separate water drops and solid impurities from the compressed air. The pu- rely mechanical mode of operation, the technical flow circulation with optimally designed housing and a powerful steam trap ensure for a long service life and that operation takes place without any problems. Materials: Housing: Aluminium with blue polyester resin coating Temperature range: Max. +120°C, option - SUPER : Max. +65°C Input pressure: 1 - 16 bar Condensate drain: G 1 / 2 “ (FT), push-in fitting for hose Ø 8 outer Supply volume: Housing with twist cap and clock controlled steam trap (230V AC) Optional: Version with automatic level controlled steam traps -SUPER F WH 2 WH 12 WH 12 WH 12 WH 48 WH 48 WH 144 WH 144 Pre-filters - PE 25 µm Connection PE 0002 G 1 / 4 “ (FT) 40 m³/h PE 02/05 PE 0004 G 3 / 8 “ (FT) 60 m³/h PE 03/05 PE 0006 G 3 / 8 “ (FT) 90 m³/h PE 03/10 PE 0009 G 1 / 2 “ (FT) 120 m³/h PE 04/10 PE 0012 G 1 / 2 “ (FT) 180 m³/h PE 04/20 PE 0018 G 3 / 4 “ (FT) 270 m³/h PE 05/20 PE 0027 G 1“ (FT) 360 m³/h PE 05/25 PE 0036 G 1 1 / 4 “ (FT) 480 m³/h PE 07/25 PE 0048 G 1 1 / 2 “ (FT) 720 m³/h PE 07/30 PE 0072 G 2“ (FT) 1080 m³/h PE 10/30 PE 0108 G 2“ (FT) 1440 m³/h PE 15/30 PE 0144 G 2 1 / 2 “ (FT) 1920 m³/h PE 20/30 PE 0192 G 3“ (FT) 2880 m³/h PE 30/30 PE 0288 G 3“ (FT) 4320 m³/h PE 30/50 Replacement part: steam trap standard, with float, 8 mm hose nozzle KAU 12 G 1 / 2 “ (MT) Used type PE/MF/SMF 0002 - 0108 UFM 12 G 1 / 2 “ (MT) Used type PE/MF/SMF 0144 - 0288 * for +20°C and 7 bar overpressure, for other pressures refer to conversion table on page 363 Field of application: For the removal of solid contaminants (Dust), dirt-oil-water aerosols up to less than 25 µm from compressed air and gaseous media. The pre-filter, for example, also filters abrasive, graphite, cement and cretaceous dust, etc. This pre-filter increases the service life of upstream MF or SMF filters. Applications: Pre-filters are used for regulating instrument air and control air in the chemical, petrochemical and phar- maceutical industries and also in plastic, food, beverage and process industries as well as in general mechanical engi- neering. They are installed to increase the service life of MF and SMF filters. Materials: Housing: Aluminium with blue polyester resin coating, filter medium: Pure, highly molecular polyethylene with aluminium end caps, O-rings: NBR (free of releasing agent and silicone) Temperature range: Max. +60°C Input pressure: 1 - 16 bar Pore width in the filter: 25 µm Condensate drain: Hose nozzle for internal hose Ø 8 (steam trap is mounted in a condensate borehole G 1 / 2 “) Supply volume: Filter housing, filter element, differential pressure gauge and automatic steam trap complete filter replacement element WH 2 WH 2 WH 2 WH 2 WH 12 WH 12 WH 12 WH 12 WH 48 WH 48 WH 48 WH 144 WH 144 --- Order example: AG-Z 0125 ** Designation for the options: With electronic steam traps . . . . . . . . . . . . . . . -SUPER F Standard type Order accessories at the same time! Coupling kits found above Order accessories at the same time! Coupling kits found above Coupling kits for block assemblies of 2 or 3 housings WH 2-2 WH 2-3 WH 12-2 WH 12-3 WH 48-2 WH 48-3 WH 144-2 WH 144-3 Supply volume: 2 pc tie rod set including necessary seals WH 2 WH 12 WH 48 WH 144 application example: 2 housings application example: 3 housings Warning: Please order wall bracket base package separately! steam trap Type for 2 housings Type for 3 housings Wall bracket basic package Max. flow* Wall bracket Replace. elements Type complete filter Wall bracket Max. flow* 362 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl