APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 6 High pressure regulators Bottle pressure reducers DIN EN ISO 2503 (DIN EN 585) Type To be used with For non-flammable gases, hose connection G 1 / 4 “, nozzle 6 mm, input pressure 200 bar (DIN 477-1) DRFDM LUFT 10 Air G 5 / 8 “ (MT) 0 - 10 bar DRFDM LUFT 20 Air G 5 / 8 “ (MT) 0 - 20 bar DRFDM SAU 10 Oxygen G 3 / 4 “ (FT) 0 - 10 bar DRFDM SAU 20 Oxygen G 3 / 4 “ (FT) 0 - 20 bar DRFDM STICK 10 Nitrogen W24.3x 1 / 14 (FT) 0 - 10 bar DRFDM STICK 20 Nitrogen W24.3x 1 / 14 (FT) 0 - 20 bar DRFDM STICK 100*** Nitrogen W24.3x 1 / 14 (FT) 0 - 100 bar DRFDM ARGON FM Argon W21.8x 1 / 14 (FT) 0 - 20 l/min** DRFDM ARGON Argon W21.8x 1 / 14 (FT) 0 - 30 l/min* DRFDM KOHLENS 10 Carbon dioxide, helium W21.8x 1 / 14 (FT) 0 - 10 bar DRFDM KOHLENS 20 Carbon dioxide, helium W21.8x 1 / 14 (FT) 0 - 20 bar For flammable gases, hose connection G 3 / 8 “ LH, nozzle 9 mm, input pressure 20 bar (DIN 477-1) DRFDM ACGAS Acetylene Bracket 0 - 1.5 bar For flammable gases, hose connection G 3 / 8 “ LH, nozzle 9 mm, input pressure 200 bar (DIN 477-1) DRFDM BRENN 1.5 Hydrogen, methane, W21.8x 1 / 14 LH (FT) 0 - 1.5 bar natural gas, coal gas (fuel gas) DRFDM BRENN 10 Hydrogen, methane, W21.8x 1 / 14 LH (FT) 0 - 10 bar natural gas, coal gas (fuel gas) For flammable gases, hose connection G 1 / 4 “ LH, nozzle 6 mm, input pressure 200 bar (DIN 477-1) DRFDM FORM FM Forming gas W21.8x 1 / 14 LH (FT) 0 - 30 l/min** Replacement seals (PTFE) for 200 bar flange connection DRFDM DR For non-flammable gases, hose connection G 1 / 4 “, nozzle 6 mm, input pressure 300 bar (DIN 477-5) DRFDMH LUFT 10 Air W30x2 (FT) (Ø 16.6/19.4) 0 - 10 bar DRFDMH SAU 10 Oxygen W30x2 (FT) (Ø 17.3/18.7) 0 - 10 bar DRFDMH STICK 10 Nitrogen W30x2 (FT) (Ø 15.9/20.1) 0 - 10 bar DRFDMH STICK 20 Nitrogen W30x2 (FT) (Ø 15.9/20.1) 0 - 20 bar DRFDMH STICK 100*** Nitrogen W30x2 (FT) (Ø 15.9/20.1) 0 - 100 bar For flammable gases, hose connection G 3 / 8 “ LH, nozzle 9 mm, input pressure 300 bar (DIN 477-5) DRFDMH BRENN 1.5 Hydrogen, methane, W30x2 LH (FT) (Ø 15.2/20.8) 0 - 1.5 bar natural gas, coal gas (fuel gas) DRFDMH BRENN 10 Hydrogen, methane, W30x2 LH (FT) (Ø 15.2/20.8) 0 - 10 bar natural gas, coal gas (fuel gas) * round instrument, ** flowmeter, *** outlet: threaded end for cutting ring connection 12 L without shut-off valve Version: Bottle pressure reducer in hot-pressed brass design with pressure gauge for bottle content and working pres- sure. Oxygen pressure reducer is BAM tested. Supply volume: Pressure reducer inclusive of shut-off valve with flowmeter Flame arrestors for pressure regulators ISO 5175 (EN 730) Version: Gas non-return valve with flame arrestor and temperature controlled cut-off valve to secure pressure regulators, distribution lines and single bottles. Type DRFDM GSV 14 Oxygen 0 - 20 bar G 1 / 4 “ G 1 / 4 “ DRFDM GSV 38 L Fuel gas 0 - 5 bar G 3 / 8 “ LH G 3 / 8 “ LH Pipeline pressure regulators up to 200 bar Version: Pipeline pressure regulator, not resettable, adjusted with toggle (type 50 bar with hand wheel) Materials: Body: Brass, seal: NBR Temperature range: - 10°C up to +90°C Media: Compressed air, nitrogen and other neutral gases Type Connection Flow DRLTG 50 G 1 / 4 “ FT 200 bar 2500 l/min 1 - 50 bar DRLTG 100 G 1 / 4 “ FT 200 bar 2700 l/min 1 - 100 bar DRLTG 150 G 1 / 4 “ FT 200 bar 2900 l/min 1 - 150 bar Cleaner and service products from page 564 Cables can be found on page 643 Gas hoses from page 216 Hose clamps from page 234 Pressure regulation range Flange connection Pressure regulation range Input pressure To be used with Input (FT) Output (MT) Operating pressure APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 353