APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 6 Service units - standard Service units, 2-part - standard up to 4 000 l/min L H H1 Version: Filter regulator resettable (with relieving system) with attached lubricator Pressure gauge connection: G 1 / 4 “ Switch panel thread: Model series 1 to 3: M 20 x 1.5 Oil metering at 1000 l/min: 1 - 2 drops/min Optional: Version with protective cage -S , version with metal container* (1.5 - 25 bar) -M , automatic drain** -AM , automatic drain closed when not pressurised** (0 - 16 bar) -AMNC - Type Thread L H H1 Model series 1, flow 600 l/min, cond. amount 35 cm³, oil supply 40 cm³, pore width in the filter 5 µm FDO 11 G 1 / 4 “ 0.5 - 10 bar 0 - 16 bar 117 236 98 FDO 12 G 3 / 8 “ 0.5 - 10 bar 0 - 16 bar 117 236 98 Model series 2, flow 800 l/min, cond. amount 50 cm³, oil supply 110 cm³, pore width in the filter 40 µm FDO 22 G 3 / 8 “ 0.5 - 10 bar 0 - 16 bar 150 270 118 FDO 23 G 1 / 2 “ 0.5 - 10 bar 0 - 16 bar 150 270 118 Model series 3, flow 2100 l/min, cond. amount 65 cm³, oil supply 135 cm³, pore width in the filter 5 µm FDO 33 G 1 / 2 “ 0.5 - 10 bar 0 - 16 bar 175 298 130 Model series 5, flow 4000 l/min, cond. amount 300 cm³, oil 550 cm³, pore width in the filter 40 µm FDOP 54 G 3 / 4 “ 0.5 - 10 bar 0 - 16 bar 230 459 190 FDOP 55 G 1“ 0.5 - 10 bar 0 - 16 bar 230 459 190 * drip cap made of metal/glass combination, ** not for model series 1, max 16 bar when combined with a metal container BW 10 BW 10 BW 20 BW 20 BW 30 BW 50 BW 50 F 85 167 102 Type Thread FDO 00* G 1 / 8 “ 0.5 - 10 bar 0 - 16 bar 40 FDO 00-3 G 1 / 8 “ 0.5 - 3 bar 0 - 6 bar 40 FDO 00-6 G 1 / 8 “ 0.5 - 6 bar 0 - 10 bar 40 FDO 00-16 G 1 / 8 “ 0.5 - 16 bar 0 - 25 bar 40 FDO 01* G 1 / 4 “ 0.5 - 10 bar 0 - 16 bar 40 FDO 01-3 G 1 / 4 “ 0.5 - 3 bar 0 - 6 bar 40 FDO 01-6 G 1 / 4 “ 0.5 - 6 bar 0 - 10 bar 40 FDO 01-16 G 1 / 4 “ 0.5 - 16 bar 0 - 25 bar 40 Service units, 2-part - mini 350 l/min WHM 30 WHM 30 WHM 30 WHM 30 WHM 30 WHM 30 WHM 30 WHM 30 * standard model series, please use preferentially as the regulation range can be applied universally, ** drip cap made of plastic, *** max. 16 bar when combined with a metal container Version: Filter regulator resettable (with relieving system) with attached lubricator Pressure gauge connection: G 1 / 8 “ Reaction limit (6 bar): 40 l/min Switch panel thread: M 30 x 1.5 Oil supply: 17 cm³ Max. condensate amount: 16 cm³ Oil metering at 250 l/min: 2 - 5 drops/10 min Pore width in the filter: 5 µm Optional: Version with metal container** (1.5 - 25 bar) -M , automatic drain*** -AM F Service units - mini and standard model series G 1 / 8 “ - G 2“ Materials: Body: Zinc die-casting Z410 (model series 5 to 8: aluminium), diaphragms and seals: NBR, container: Poly- carbonate Temperature range: Up to max. +60°C Input pressure: 1.5 - 16 bar Condensate draining: Semi-automatic (as soon as the inlet pressure falls below the minimum input pressure, the drain valve opens automatically. By screwing the drain screw tight, you can prevent the semi-automatic drain valve from ope- ning.) Media: Compressed air, non-toxic and non-inflammable gases ATEX: Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU Advantages: Ÿ Automatic venting in the event of overpressure on the secondary side. Ÿ Can be filled with oil while under pressure. Order example: FDO 00 ** Designation for the options: Version with metal container** (1.5 - 25 bar) . . . -M With automatic drain*** (1.5 to 16 bar) . . . . . . -AM F Standard type ü Order example: FDO 11 ** Designation for the options: With protective cage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -S With metal container* (1.5 - 25 bar) . . . . . . . . . . . . . . . . . . . . . . -M With automatic drain** (1.5 to 16 bar) . . . . . . . . . . . . . . . . . . . . . -AM With automatic drain, closed when depressurised** (0 to 16 bar) . . -AMNC F Standard type Cutting ring fittings from page 77 Separable double nipple from page 109 Coupling sockets NW7 starting on page 150 Compressed air rubber hoses from page 212 Pressure regula. range Pressure gauge display Press. gauge diameter Mounting bracket Pressure regula. range Pressure gauge display Mounting bracket APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 343