APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 6 Filter regulators - Futura Filter regulators Futura model series Version: Pressure regulator resettable (with relieving system) with additional filtering using the centrifugal principle and sintered filter Materials: Body: Grivory® (PA 66), spring hood: POM, diaphragms and seals: NBR, condensate container: Polycarbo- nate Temperature range: -10°C to max. +50°C Input pressure: 1.5 - 16 bar (model series 0: 1.5 - 12 bar) Condensate draining: Semi-automatic 1) Pressure gauge connection: G 1 / 4 “ Pore width in the filter: 5 µm Media: Compressed air, neutral gases Advantages: Ÿ Automatic venting in the event of overpressure on the secondary side. Ÿ Simple assembly of single components using coupling kits within a model series. Ÿ Hand wheel can be locked by pressing down on it and bolted with a lock - please use VHS 20 (page 641) (model series 0 cannot be locked) Filter regulators Futura model series 0 1 000 l/min Thread FR 014 F* FR 014 FB* G 1 / 4 “ 0.5 - 8 bar 0 - 10 bar FR 014-4 F FR 014-4 FB G 1 / 4 “ 0.2 - 4 bar 0 - 6 bar FR 014-10 F FR 014-10 FB G 1 / 4 “ 0.5 - 10 bar 0 - 16 bar * standard series, please use in preference, as the regulation range is universally applicable, *** installation of a standard pressure gauge only possible with a pressure gauge adapter, display range of the compact pressure gauge: 0 to 12 bar, or 0 to 6 bar Max. condensate amount: 16 cm 3 Switch panel thread: M 30 x 1.5 Supply volume: Filter regulator including pressure gauge Flow: 1000 l/min, relieving system: 25 l/min Optional: Version with metal container and without inspection tube -M , automatic drain -AM , automatic drain closed when not pressurised (0 - 12 bar) -AMNC ü F Coupling kit W 0 F KP 0 F or KPW 0 F W 0 F KP 0 F or KPW 0 F W 0 F KP 0 F or KPW 0 F 43 63 168 1) as soon as the inlet pressure falls below the mi- nimum input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing on the drain plug tightly. Order example: FR 014 F ** Designation for the options: With metal container, without inspection tube . . . . . . . . . . . . . . -M With automatic drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -AM With automatic drain, closed when depressurised (0 to 12 bar) . -AMNC F Standard type Filter regulators Futura model series 1 up to 2 500 l/min Type Thread FR 14 F* G 1 / 4 “ 0.5 - 8 bar 0 - 10 bar FR 14-1 F G 1 / 4 “ 0.1 - 1 bar 0 - 1.6 bar FR 14-2 F G 1 / 4 “ 0.1 - 2 bar 0 - 2.5 bar FR 14-4 F G 1 / 4 “ 0.2 - 4 bar 0 - 6 bar FR 14-10 F G 1 / 4 “ 0.5 - 10 bar 0 - 16 bar FR 14-16 F G 1 / 4 “ 0.5 - 16 bar 0 - 25 bar FR 38 F* G 3 / 8 “ 0.5 - 8 bar 0 - 10 bar FR 38-1 F G 3 / 8 “ 0.1 - 1 bar 0 - 1.6 bar FR 38-2 F G 3 / 8 “ 0.1 - 2 bar 0 - 2.5 bar FR 38-4 F G 3 / 8 “ 0.2 - 4 bar 0 - 6 bar FR 38-10 F G 3 / 8 “ 0.5 - 10 bar 0 - 16 bar FR 38-16 F G 3 / 8 “ 0.5 - 16 bar 0 - 25 bar * standard series, please use preferentially as the regulation range can be applied universally Max. condensate amount: 28 cm 3 Switch panel thread: M 36 x 1.5 Supply volume: Pressure regulator including 50 mm pressure gauge Flow: G 1 / 4 “: 2000 l/min, G 3 / 8 “: 2500 l/min, relieving system: 70 l/min ATEX: Operating material without its own potential source of ignition in accordance with Directive 2014/34/EU Optional: Version with metal container and inspection tube -M , automatic drain -AM , automatic drain closed when not pressurised (0 - 16 bar) -AMNC , safety version: With upstream lockable ball valve and filler valve -Si 96 225 52 F Coupling kit W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F W 1 F KP 1 F or KPW 1 F Order example: FR 14 F ** Designation for the options: With metal container and inspection tube . . . . . . . . . . . . -M With automatic drain . . . . . . . . . . . . . . . . . . . . . . . . . . . -AM With automatic drain, closed when depressurised (0 to 16 bar) . . . . . . . . . . . . . -AMNC With upstream, lockable ball valve and filler valve . . . . . . -Si F Standard type Push-in hoses on page 228 Threaded nozzles & hose nozzles from page 64 Compressed air rubber hoses from page 212 PU, PA, PTFE and PE hoses from page 192 Type with compact pressure gauge *** Type with 40 mm standard press. gauge Pressure regulation range Pressure gauge display Mounting bracket Pressure regula. range Pressure gauge displ. Mounting bracket 324 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl