APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 5 Pneumatically actuated ball valves ISO Type G DN L 5211* PN KH 14 F MS Rp 1 / 4 “ 10 67 F 03 40 bar KH 38 F MS Rp 3 / 8 “ 14 67 F 03 40 bar KH 12 F MS G 1 / 2 “ 15 75 F 03 40 bar KH 34 F MS G 3 / 4 “ 20 80 F 03 40 bar KH 10 F MS G 1“ 25 90 F 03 40 bar KH 114 F MS G 1 1 / 4 “ 32 110 F 05-VK11 40 bar KH 112 F MS G 1 1 / 2 “ 40 120 F 05-VK11 40 bar KH 20 F MS G 2“ 50 140 F 05 40 bar KH 212 F MS G 2 1 / 2 “ 65 165 F 05 / F 07-VK14 30 bar KH 30 F MS G 3“ 76 188 F 07-VK14 25 bar KH 40 F MS Rp 4“ 90 200 F 07-VK14 20 bar * for assembly flange dimensions see page 309 Brass ball valves with full throughway and direct assembly flanges up to 40 bar Materials: Housing: Brass nickel-plated, ball: Brass hard chrome-plated, seal: PTFE/FKM, manufactured silicone-free (G 1 / 2 “ - G 2“), length according to DIN 3202-M3 (G 1 / 2 “ - G 2“), DVGW approval for G 1 / 2 “ - G 2“ (PN 5/MOP 5) Temperature range: -20°C to max. +160°C (G 2 1 / 2 “ - G 4“: max. +120°C), gas: -20°C to max. +60°C Operating range: Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, heating oil, solvents, weak acids and alkalis, G 1 / 2 “ - G 2“: Gases in accordance with DVGW worksheet (such as natural gas, city gas, liquid gas up to 5 bar) Advantages: Ÿ An actuator can be fitted to the assembly flange to automate the operation of the ball valve. 50 L G Warning: Please check which temperatures the actuator you are installing is authorised to work in. ü EN 331 ISO Type G DN L 5211* KH 143 F ES G 1 / 4 “ 10 60 F 03 / F 04-VK9 KH 383 F ES G 3 / 8 “ 12 60 F 03 / F 04-VK9 KH 123 F ES G 1 / 2 “ 15 75 F 03 / F 04-VK9 KH 343 F ES G 3 / 4 “ 20 80 F 03 / F 04-VK9 / F 05-VK9 KH 103 F ES G 1” 25 90 F 04 / F 05-VK11 KH 1143 F ES G 1 1 / 4 “ 32 110 F 04 / F 05-VK11 / F 07-VK11 KH 1123 F ES G 1 1 / 2 “ 40 120 F 05 / F 07-VK14 KH 203 F ES G 2” 50 140 F 05 / F 07-VK14 KH 2123 F ES G 2 1 / 2 “ 65 185 F 07 / F 10-VK17 KH 303 F ES G 3“ 80 205 F 07 / F 10-VK17 KH 403 F ES G 4“ 100 240 F 10 * for assembly flange dimensions see page 309 Stainless steel ball valves, 3-piece, full throughway and direct assembly flanges PN 63 Materials: Housing: AISI 316, ball: AISI 316, seal: PTFE (15% GF)/FKM Length according to DIN 3202-M3, assembly flange according to ISO 5211 Temperature range: -20°C to max. +180°C Operating range: Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents, aggressive media Advantages: Ÿ An actuator can be fitted to the assembly flange to automate the operation of the ball valve. G DN L ü Warning: Please check which temperatures the actuator you are installing is authorised to work in. Actuator size* DN Double act. Single act. KHFL 153/** P ES KHFL 153/** P FS ES KHFL 153/** P FO ES 15 130 1 2-F03 KHFL 203/** P ES KHFL 203/** P FS ES KHFL 203/** P FO ES 20 150 1 2-F03 KHFL 253/** P ES KHFL 253/** P FS ES KHFL 253/** P FO ES 25 160 2 6-F04 KHFL 323/** P ES KHFL 323/** P FS ES KHFL 323/** P FO ES 32 180 6-VK11 6-VK11 KHFL 403/** P ES KHFL 403/** P FS ES KHFL 403/** P FO ES 40 200 6 6 KHFL 503/** P ES KHFL 503/** P FS ES KHFL 503/** P FO ES 50 230 12 12 KHFL 653/** P ES KHFL 653/** P FS ES KHFL 653/** P FO ES 65 290 12-F07 12-F07 KHFL 803/** P ES KHFL 803/** P FS ES KHFL 803/** P FO ES 80 310 12-F07 25-F07 KHFL 1003/** P ES KHFL 1003/** P FS ES KHFL 1003/** P FO ES 100 350 50-F10 50-F10 * for dimensions and replacement actuators see page 310 Ball valve Materials: Housing: AISI 316, ball: AISI 316, seal: PTFE (15% GF) Length according to DIN 3202-F1 Temperature range: -20°C to max. +180°C Operating range: Water, oil, compressed air, vacuum (max. -0.9 bar), fuels, solvents, aggressive media Optional: Certificate 3.1 Rotary actuator Design: ATEX-compliant II 2GD c 85°C (Actuators with size 12 or greater: II 2GD c 110°C) Materials: Housing: Aluminium anodised, gear rack and piston: Aluminium, cover: Acetal resin, seals: NBR Temperature range: -20°C to max. +80°C Control pressure: 6-10 bar (lower pressures upon request) Optional: FKM seals -V Stainless steel flanged ball valves, 3-piece, with pneumatic rotary actuators PN 16/40 F F Order example: KHFL 253/** P ES ** Designation for the actuator options: FKM seal . . . . . . . . . . . . . . . . . . . . . -V F Standard type Nominal pressure PN 16 . . . . . . . . . . . . . . . -16 PN 40 . . . . . . . . . . . . . . . -40 Warning: In case of high media temperatures, the actuator must be cooled! For more flange sizes see page 262. Connection diagram acc. to NAMUR, with female thread! TIP for Na m ur co nn ectio n a n d fe m ale thread Install. length ball valve Type double acting Type spring closing Type spring opening 308 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl