APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 5 3-way ball valves 3-way T ball valves with one-sided toggle grip, compact PN 20 Materials: Housing: Brass chrome-plated, ball: Brass chrome-plated, seal: PTFE/NBR Temperature range: -20°C to max. +80°C Operating range: Water (no steam), neutral, gaseous and non-aggressive, liquid media, mineral oils, compressed air, vacuum (max. -0.99 bar) Switch panel mounting: Hole diameter: 14.5 mm, sheet metal thickness: Max. 4.5 mm G DN L H1 H2 R KHTC 3/18 L KHTC 3/18 T G 1 / 8 “ 5.0 35 33.5 15.5 19 KHTC 3/14 L KHTC 3/14 T G 1 / 4 “ 5.0 37 33.5 17.5 19 KHTC 3/38 L KHTC 3/38 T G 3 / 8 “ 7.0 42 35.0 19.5 19 m ou n ti ng thread R H1 H2 L L borehole: position 1 position 2 closed position 3 T borehole: position 1 position 2 position 3 G DN L H R C PN KH 3/14 L MS KH 3/14 T MS G 1 / 4 “ 10 77 65 125 60 55 bar KH 3/38 L MS KH 3/38 T MS G 3 / 8 “ 12 77 65 125 60 55 bar KH 3/12 L MS KH 3/12 T MS G 1 / 2 “ 14 77 65 125 60 50 bar KH 3/34 L MS KH 3/34 T MS G 3 / 4 “ 18 92 83 145 71 50 bar KH 3/10 L MS KH 3/10 T MS G 1” 23 104 96 170 82 45 bar KH 3/114 L MS KH 3/114 T MS G 1 1 / 4 “ 29 118 102 170 93 35 bar KH 3/112 L MS KH 3/112 T MS G 1 1 / 2 “ 36 138 109 170 109 35 bar KH 3/20 L MS KH 3/20 T MS G 2” 45 162 139 260 129 35 bar KH 3/212 L MS* KH 3/212 T MS* Rp 2 1 / 2 “ 50 194 124 240 158 20 bar * max. 80°C, no vacuum 3-way ball valves up to 55 bar Materials: Housing: Brass nickel-plated, ball: Brass hard chrome-plated, seal: PTFE/NBR Temperature range: -10°C to max. +120°C Switching position: Can be changed by moving the handle according to the table on page 299. The standard position for T boreholes is position T1. Properties: Pressure inlet is possible from all the three sides. Operating range: Water, compressed air, vacuum (max. -0.9 bar), oils, fuels (no diesel), heating oil, solvents, weak acids and alkalis. C L DN H R G KH3/14-12 G KH3/14-12 G KH3/14-12 G KH3/34 G KH3/10-112 G KH3/10-112 G KH3/10-112 G KH3/20 G KH3/212 G R L DN H C ISO G DN L H R C 5211 KH 3/14 L ES E KH 3/14 T ES E G 1 / 4 “ 11.6 76.0 67 150 37.3 F 04 KH 3/38 L ES E KH 3/38 T ES E G 3 / 8 “ 12.5 76.0 67 150 37.3 F 04 KH 3/12 L ES E KH 3/12 T ES E G 1 / 2 “ 12.5 76.0 67 150 37.3 F 04 KH 3/34 L ES E KH 3/34 T ES E G 3 / 4 “ 16.0 86.0 77 150 44.0 F 04 KH 3/10 L ES E KH 3/10 T ES E G 1” 20.0 99.1 83 180 49.0 F 05 KH 3/114 L ES E KH 3/114 T ES E G 1 1 / 4 “ 25.0 117.4 88 180 57.0 F 05 KH 3/112 L ES E KH 3/112 T ES E G 1 1 / 2 “ 32.0 123.8 116 243 61.3 F 07 KH 3/20 L ES E KH 3/20 T ES E G 2” 38.0 148.0 124 243 74.3 F 07 Stainless steel 3-way ball valves Eco-Line/PN 63 Materials: Housing: AISI 316, ball: AISI 316, seal: PTFE (15% GF), handle: AISI 304 Temperature range : -20°C to max. +200°C Assembly flange according to ISO 5211, lockable hand lever, please order padlocks separately (see page 640). Handle can be swivelled by 360°, many possible switching positions. Switching position: Can be changed by moving the handle according to the table on page 299. The standard position for T boreholes is T1. Properties: Pressure inlet is possible from all the three sides. Operating range: Water, steam, oil, compressed air, fuels, solvents, aggressive media Optional: Certificate 3.1 F Liquid seals, gaskets & tapes from page 549 Threaded nozzles & hose nozzles from page 64 Compressed air and water hoses from page 208 Pressure regulators made of stainless steel and brass from p. 355 Type L borehole Type T borehole Type replace. handles Type L borehole Type T borehole Type L borehole Type T borehole APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 297