APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 5 Shut-off valves L H E * water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge. air flow [l/min] ≈ 13.4 . K V . P input , if P output < (P input and P output are absolute values in bar.) P input 2 Type Thread DN L H E max NADEL 18 MSV G 1 / 8 “ 4 51.6 64 3 NADEL 14 MSV G 1 / 4 “ 4 57.0 64 3 NADEL 38 MSV G 3 / 8 “ 8 63.0 90 10 NADEL 12 MSV G 1 / 2 “ 8 69.0 90 10 Needle shut-off valves with bulkhead threads for panel mounting PN 18 Materials: Housing: Brass nickel-plated, seal: NBR Temperature range: -10°C to max. +80°C Switch panel mounting: For borehole diameter Ø 14.5 mm Needle shut-off valves up to 100 bar Materials: Housing: Brass, seal: NBR ( 3 / 4 “- 2”: PTFE) Temperature range: -30°C to max. +110°C (G 1 / 8 “: -10°C to max. +60°C) Type FT/FT Type MT/MT Thread DN L KV value* PN NADEL 18 --- G 1 / 8 “ 4 36 --- 15 bar NADEL 14 NADEL 14 A G 1 / 4 “ 4 42 --- 40 bar NADEL 38 NADEL 38 A G 3 / 8 “ 7 50 --- 40 bar NADEL 12 --- G 1 / 2 “ 11 64 --- 40 bar NADEL 34 --- G 3 / 4 “ 9 67 18 l/min 100 bar NADEL 10 --- G 1” 11 75 28 l/min 100 bar NADEL 114 --- G 1 1 / 4 “ 13 110 42 l/min 100 bar NADEL 112 --- G 1 1 / 2 “ 15 110 60 l/min 100 bar NADEL 20 --- G 2“ 15 110 60 l/min 100 bar L L * water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge. air flow [l/min] ≈ 13.4 . K V . P input , if P output < (P input and P output are absolute values in bar.) P input 2 Needle shut-off valves with hand wheels up to 400 bar Materials: Housing: Zinc-pl. steel or stainl. steel AISI 316Ti, seal: Graphite (type AISI 316Ti: PTFE), hand wheel: Pressed plastic Temperature range: -30°C to max. +350°C (type AISI 316Ti: -30°C to max. +250°C) Thread DN L KV value* PN NADEL 18 HR NADEL 18 HR ES G 1 / 8 “ 4 45 4 l/min 400 bar NADEL 14 HR NADEL 14 HR ES G 1 / 4 “ 5 55 8 l/min 400 bar NADEL 38 HR NADEL 38 HR ES G 3 / 8 “ 6 55 10 l/min 400 bar NADEL 12 HR NADEL 12 HR ES G 1 / 2 “ 7 60 12 l/min 400 bar NADEL 34 HR NADEL 34 HR ES G 3 / 4 “ 9 75 18 l/min 200 bar NADEL 10 HR NADEL 10 HR ES G 1” 12 100 32 l/min 200 bar NADEL 114 HR NADEL 114 HR ES G 1 1 / 4 “ 15 110 60 l/min 160 bar NADEL 112 HR NADEL 112 HR ES G 1 1 / 2 “ 22 130 115 l/min 120 bar NADEL 20 HR NADEL 20 HR ES G 2“ 22 130 130 l/min 120 bar L L ««««« Ball shut-off valves PN 40 Materials: Housing: Hot-pressed brass, handle: Plastic, seal: NBR, valve seat with metal sealing Temperature range: -30°C to max. +110°C Type angle Old order number Type straight Thread DN ASVW 18 ECK 18 ASVG 18 G 1 / 8 “ 4.0 ASVW 14 ECK 14 ASVG 14 G 1 / 4 “ 5.5 ASVW 38 ECK 38 ASVG 38 G 3 / 8 “ 8.0 --- --- ASVG 12 G 1 / 2 “ 11.0 * water flow rate at +20°C, 1 bar pressure at the valve inlet, free discharge. air flow [l/min] ≈ 13.4 . K V . P input , if P output < (P input and P output are absolute values in bar.) P input 2 Type Thread DN L H KV value* NADEL 18 ES E G 1 / 8 “ 2.5 48 77 8.0 l/min NADEL 14 ES E G 1 / 4 “ 3.5 56 80 11.5 l/min NADEL 38 ES E G 3 / 8 “ 3.5 56 80 13.5 l/min NADEL 12 ES E G 1 / 2 “ 4.8 66 89 18.0 l/min NADEL 34 ES E G 3 / 4 “ 6.4 66 93 21.0 l/min NADEL 10 ES E G 1“ 9.5 80 108 24.0 l/min Materials: Housing AISI 316, handle: AISI 304, seal: PTFE (on the spindle) Temperature range: -20°C to max. +200°C Stainless steel needle shut-off valves Eco-Line PN 300 L H Outstanding value! ««««« Stainless steel screw connections from page 78 Push-in hoses on page 228 Pipe clamps from page 244 Flow indicators and meters from page 395 Type zinc-plated steel Type AISI 316Ti 294 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl