APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Compensators B Type DN L W D KOMFLK 40 4 40 130 16 150 KOMFLK 50 4 50 130 16 165 KOMFLK 65 4 65 130 16 185 KOMFLK 80 8 80 130 18 200 KOMFLK 100 8 100 130 18 220 KOMFLK 125 8 125 130 20 250 KOMFLK 150 8 150 130 22 285 KOMFLK 200 12 200 130 24 340 Elastomer compensators (compact) PN 10 Version: Shallow undulating, form pressed bellows, good elastic with pressure carrier of synthetic fibre and wire enforced rubber flange collar (self-sealing), both sides rotatable steel flange Materials: Bellows: EPDM (hot water, acid and alkalis resistant), flange: RSt 37.2 galvanised zinc-plated Temperature range: -10 to max. +105°C (dependent on operating pressure) Operating pressure: 10 bar (to +90°C), 8 bar (to +105°C) burst pressure 45 bar (for intermittent load the maximum operation pressure is 30 % lower.) Connection: DIN Flanges PN 16 Compression Stretching 30 mm 10 mm laterally Angle of deflection 13 mm 15° Especially good value! ± Type DN angular PN L W D Di KOMFL 20 20 20 10 25° 16 bar 100 16 115 22 ± 2 KOMFL 25 25 20 10 25° 16 bar 100 16 115 22 ± 2 KOMFL 32 32 35 10 25° 16 bar 125 16 140 39 ± 3 KOMFL 40 40 35 10 25° 16 bar 125 16 150 45 ± 3 KOMFL 50 50 35 10 21° 16 bar 125 16 165 56 ± 3 KOMFL 65 65 35 10 17° 16 bar 125 18 185 72 ± 3 KOMFL 80 80 40 10 14° 16 bar 150 20 200 84 ± 3 KOMFL 100 100 40 10 11° 16 bar 150 20 220 109 ± 3 KOMFL 125 125 40 10 9° 16 bar 150 22 250 133 ± 4 KOMFL 150 150 40 10 7° 16 bar 150 22 285 161 ± 4 KOMFL 175 175 40 10 6° 16 bar 150 22 315 185 ± 4 KOMFL 200 200 45 15 8° 10 bar 175 25 340 209 ± 5 KOMFL 250 250 45 15 6° 10 bar 175 25 395 262 ± 5 KOMFL 300 300 45 15 5° 10 bar 200 25 445 312 ± 5 * when installing compensators the instructions contained in the assembly instructions must be observed! Elastomer compensators PN 10/16 Version: Shallow undulating, form pressed bellows, good elastic with pressure carrier of synthetic fibre and wire enforced rubber flange collar (self-sealing), both sides rotatable steel flange Materials: Bellows: EPDM (hot water, acid and alkalis resistant), flange: RSt 37.2 galvanised zinc-plated Temperature range*: To max. +90°C (dependent on operating pressure) Operating pressure*: 16 bar (to +50°C), 10 bar (to +80°C), 6 bar (to +90°C), burst pressure: 48 bar (For intermit- tent load the max. operating pressure is 30% lower.) Connection: DIN Flanges PN 16 (DN 200 - DN 300: DIN Flanges PN 10) Optional: Bellows from NBR (oil resistant) -B , bellows from butyl (for use with drinking water according to KTW recommendation) -LE F B Di axial laterally 15mm angular (DN 20= 10mm) Order example: KOMFL 50 ** Standard type F Designation for the options: Bellows from NBR (oil resistant) . . . . . . -B Bellows from butyl (for drinking water ) -LE Eye protection from page 591 Cables can be found on page 643 Cleaner and service products from page 564 Work gloves on page 589 Number of holes Axial compression Axial stretching 264 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl