APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Band-It - The power clamp Type 1 / 4 “ Type 3 / 8 “ Type 1 / 2 “ Type 5 / 8 “ Type 3 / 4 “ (6.4 x 0.51 mm) (9.5 x 0.64 mm) (12.7 x 0.76 mm) (15.9 x 0.76 mm) (19.1 x 0.76 mm) JS240 JS201 --- --- --- 20.6 JS242 JS243 JS203 --- --- 25.4 --- --- JS204 --- 31.8 JS241 JS202 --- --- --- 34.9 JS252 --- JS231 JS205 --- 38.1 --- --- JS236 JS206 --- 44.5 JS253 JS245 JS237 JS207 JS227 50.8 --- --- --- JS208 --- 57.2 JS220 JS221 JS233 JS209 --- 63.5 JS256 --- JS230 --- JS210 69.9 JS244 JS246 JS234 --- JS211 76.2 JS257 JS255 JS247 --- JS212 88.9 JS258 JS248 JS249 --- JS213 101.6 JS259 --- --- --- JS214 114.3 --- --- --- --- JS215 127.0 --- --- --- --- JS270 133.4 --- --- --- --- JS216 152.4 --- --- --- --- JS217 165.1 --- --- --- --- JS218 177.8 --- --- --- --- JS219 203.2 ü Especially strong! Clamp the clamping tool in the vise press. Set the adapter on the tool nosepiece Guide the clamp into the tool. Hold the end of the tape with the cam lever. Push the hose through the clamp and turn the crank of the clamping to the right until the required tension is reached. The maximum tension is rea- ched when the tape can no longer be pulled through the buckle. Movement of the tape can be "felt" slightly by placing on the fingers. Turn the hose with the clamp so far back that the shear hooks can grip behind the strap. Parallel to that loosen the crank by a quarter to a half turn (depending on hose type and size). With tool type J001: Move the cutting lever with a strong jerk forward, so that the end of the tape is cut. With tool type J050: Pull the spindle of the adapter by hand on the knurled disk until the strap is firmly clam- ped. Set the ratchet on the he- xagon and turn until the end of the tape is cut. The finish assembled ready made clamp does not require any subsequent hitting or hammering. Ready-made clamps - assembly instructions With tool type J001 With tool type J050 Type Description C001 Standard clamping tool Yes Yes (only with J001 or J050) Yes C003 Heavy-duty clamping tool Yes Yes (only with J050) Yes C075 "Bantam" tool No No Yes J001 No Yes (only with C001) No J050 No Yes (only with C001 or C003) No Band-It assembly tools type J050 type C003 type J001 type C001 type C075 Clamps Ø internal max. Suitable for tape 201/316 Standard adapter for C001 when processing junior clamps (cut using the lever) Heavy-duty adapter for C001/C003, when processing junior clamps (cut using the ratchets) Suitable for Valustrap Suitable for ready-made clamps Junior 201 Band-It ready prefabricated clamps Type Junior 201 Application: For high loading, e.g. hose connections Assembly tool: C001 & J001, C001 & J050, C003 & J050 Materials: Rust-free stainless steel AISI 201 (1.4372) with fully rounded edges and high tensile strength (about 25% hig- her than AISI 316) Advantages: Ÿ Patented, gap-free design of interior surface avoids leaks especially in thin walled hoses Ÿ High vibration resistance Ÿ Easy and quick manual processing - closed by means of a simple handle movement Ÿ Semi-automatic and automatic processing is possible Ÿ Easy to store because small clamps can be manufactured from large clamps APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 241