APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Oil and fuel hoses Suction hoses for hydraulic oil acc. to SAE 100 R 4 with ribbed outer covers Type R 4-19 19.0 28.0 70 R 4-25 25.4 34.0 85 R 4-31 32.0 42.0 105 R 4-38 38.2 48.0 130 R 4-51 50.8 61.0 165 R 4-63 63.5 73.5 220 R 4-76 76.2 90.0 270 R 4-90 90.0 104.0 340 R 4-102 101.6 116.0 390 Materials: Inner and outer cover made from synthetic rubber, pressure carrier: Two highly resistant textile meshes and a spring steel coil Temperature range: -40°C to max. +100°C (temporary to max. +120°C) Operating pressure: 10 bar, burst pressure: 30 bar (vacuum up to -0.9 bar) Properties: Outside cover is especially abrasion resistant, oil, grease, ozone and weather resistant Resistance: Mineral oils, mineral oils with up to 40% aromatic content, polyglycol based oils, rapeseed oil, bio oil, water, water/glycol emulsions, water/oil emulsions Roll length: 60 m Advantages: Ÿ Low bend radius and high flexibility thanks to the ribbed outer cover. ü Type SILBER 611 ES 5.5 10.5 20 bar 50 SILBER 813 ES 7.5 12.5 15 bar 50 SILBER 915 ES 9.0 15.0 15 bar 50 SILBER 1218 ES 11.5 18.0 15 bar 50 SILBER 1522 ES 14.5 22.0 15 bar 50 SILBER 2129 ES 21.0 29.0 10 bar 20 SILBER 2533 ES 25.0 33.0 10 bar 20 Silver hoses with stainless steel wire braiding (fuel hoses) Temperature range: Diesel, water, air and heating oil: -30°C to max. +80°C (fuels with up to 30% benzene content: -30°C to max. +40°C) Operating range: For commercial fuels such as petrol, diesel, heating oil, water, and air. Not suitable for biodiesel or rapeseed methyl ester (RME). Silver hoses with galvanised steel wire braiding (fuel hoses) Temperature range: Diesel, water, air and heating oil: -30°C to max. +80°C (fuels with up to 30% benzene content: -30°C to max. +40°C) Operating range: For commercial fuels such as petrol, diesel, heating oil, water, and air. Not suitable for biodiesel or rapeseed methyl ester (RME). Type SILBER 49 3.5 8.5 32 bar 20 SILBER 47 4.0 7.0 12 bar 50 SILBER 510 4.5 9.5 20 bar 20 SILBER 611 5.5 10.5 20 bar 20 SILBER 69 6.0 9.0 12 bar 50 SILBER 813 7.5 12.5 15 bar 20 SILBER 912 9.0 12.0 12 bar 50 SILBER 914 9.0 14.0 15 bar 20 SILBER 1015 9.5 15 20 bar 20 SILBER 1118 11.0 17.5 20 bar 20 SILBER 1422 14.0 21.2 15 bar 20 SILBER 1826 17.5 26.0 14 bar 20 SILBER 2132 20.5 32.0 14 bar 20 SILBER 2435 24.0 35.0 12 bar 20 Bundle and steel spirals from p. 247 Threaded nozzles & hose nozzles from page 64 Compression ring screw connections from page 77 Hydraulic couplings from page 170 Hose Ø internal Min. bend radius Hose Ø external Operating pressure Roll length m Rubber hose Ø internal Rubber hose Ø external Operating pressure Roll length m Rubber hose internal Rubber hose Ø external Contact us for low pressure fittings & presses We cut ou r hoses to you r r equi r ed le n gth! Contact us for pre-cut and assembled parts to special co n ditio n s. APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 227