APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Heat resistant hoses Type Operating pressure SIFLEX 83 83 -0.30 to 1.0 bar SIFLEX 89 89 -0.295 to 0.9 bar SIFLEX 95 95 -0.27 to 0.9 bar SIFLEX 102 102 -0.26 to 0.9 bar SIFLEX 114 114 -0.21 to 0.8 bar SIFLEX 127 127 -0.17 to 0.8 bar SIFLEX 152 152 -0.14 to 0.6 bar SIFLEX 178 178 -0.10 to 0.6 bar SIFLEX 203 203 -0.07 to 0.5 bar SIFLEX 254 254 -0.05 to 0.4 bar SIFLEX 305 305 -0.03 to 0.1 bar Type Operating pressure SIFLEX 13 13 -0.58 to 1.8 bar SIFLEX 19 19 -0.53 to 1.5 bar SIFLEX 25 25 -0.53 to 1.4 bar SIFLEX 32 32 -0.50 to 1.4 bar SIFLEX 38 38 -0.50 to 1.4 bar SIFLEX 44 44 -0.44 to 1.2 bar SIFLEX 51 51 -0.44 to 1.2 bar SIFLEX 63 63 -0.40 to 1.1 bar SIFLEX 65 65 -0.40 to 1.1 bar SIFLEX 70 70 -0.35 to 1.1 bar SIFLEX 76 76 -0.35 to 1.0 bar Silicone hot air hoses up to +310°C, single-layer up to 1.8 bar Materials: Silicone-coated glass fibre fabric with interior exposed spring coil Temperature range: -80°C to max. +310°C Manufacturer length: 4 m (may be extended by splicing at factory) exposed steel wire coil Type Operating pressure SIFLEX 83/2 83 -0.40 to 2.1 bar SIFLEX 89/2 89 -0.40 to 2.1 bar SIFLEX 95/2 95 -0.40 to 2.0 bar SIFLEX 102/2 102 -0.35 to 1.8 bar SIFLEX 114/2 114 -0.28 to 1.7 bar SIFLEX 127/2 127 -0.21 to 1.5 bar SIFLEX 152/2 152 -0.17 to 1.1 bar SIFLEX 178/2 178 -0.14 to 0.8 bar SIFLEX 203/2 203 -0.10 to 0.6 bar SIFLEX 254/2 254 -0.07 to 0.4 bar SIFLEX 305/2 305 -0.05 to 0.2 bar Type Operating pressure SIFLEX 13/2 13 -0.70 to 2.5 bar SIFLEX 19/2 19 -0.70 to 2.5 bar SIFLEX 25/2 25 -0.70 to 2.5 bar SIFLEX 32/2 32 -0.58 to 2.5 bar SIFLEX 38/2 38 -0.58 to 2.4 bar SIFLEX 44/2 44 -0.58 to 2.4 bar SIFLEX 51/2 51 -0.53 to 2.4 bar SIFLEX 60/2 60 -0.46 to 2.2 bar SIFLEX 63/2 63 -0.46 to 2.2 bar SIFLEX 65/2 65 -0.46 to 2.2 bar SIFLEX 70/2 70 -0.46 to 2.2 bar SIFLEX 76/2 76 -0.44 to 2.1 bar Silicone hot air hoses up to +310°C, two-layer up to 2.5 bar Materials: Silicone-coated glass fibre fabric with interior exposed spring coil and additional internal coating. Thus the hose is smooth on the inside. Temperature range: -80°C to max. +310°C Manufacturer length: 4 m (may be extended by splicing at factory) sew n steel wire coil Type Internal Ø Flame retardant hose (roller length 15 m) FSS 6 6 FSS 8 8 FSS 10 10 FSS 13 13 FSS 16 16 FSS 19 19 FSS 22 22 FSS 25 25 FSS 29 29 FSS 32 32 FSS 35 35 FSS 38 38 FSS 41 41 FSS 44 44 FSS 51 51 Approx. 11 m tape band to seal and fix the ends, max. +246°C FSS TAPE 25 25 mm wide, 0.5 mm thick FSS TAPE 38 38 mm wide, 1.5 mm thick Flame retardence and insulation hoses (industrial quality) Application: Protects against the effects of external heat and prevents heat loss, repels liquid metal splashes (foundry glass processing) Materials: Outside mantle: Temperature resistant special silicone, internal mantle: Special glass fibre mesh Temperature range: -60°C to max. +260°C (cont. temp.), +1090°C (approx. 15-20 min), +1650°C (approx. 15-30 sec.) Note: Fix the protective hose at the ends using FSS TAPE, with 50% overlapping Knives on page 595 Threaded nozzles from page 64 Kamlock couplings from page 186 Wire hose clamps from page 238 Hose Ø internal Hose Ø internal Hose Ø internal Hose Ø internal 224 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl