APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Suction hoses and pressure hoses Hose Min. Roll length Typ Ø internal bend radius Operating pressure m Lightweight, wall thickness: ca. 0.4 mm PUSPL 25 AS 25 18 -0,30 to 0,60 bar 10 PUSPL 30 AS 30 21 -0,30 to 0,60 bar 30 PUSPL 40 AS 40 28 -0,25 to 0,50 bar 30 PUSPL 50 AS 50 35 -0,20 to 0,40 bar 15 PUSPL 60 AS 60 42 -0,16 to 0,40 bar 15 PUSPL 70 AS 70 49 -0,14 to 0,35 bar 15 PUSPL 75 AS 75 53 -0,10 to 0,30 bar 15 PUSPL 80 AS 80 56 -0,10 to 0,27 bar 15 PUSPL 90 AS 90 63 -0,09 to 0,23 bar 15 PUSPL 100 AS 100 70 -0,09 to 0,20 bar 15 PUSPL 120 AS 120 85 -0,08 to 0,19 bar 15 PUSPL 125 AS 125 88 -0,08 to 0,19 bar 15 PUSPL 140 AS 140 95 -0,07 to 0,15 bar 15 PUSPL 150 AS 150 105 -0,06 to 0,11 bar 15 PUSPL 160 AS 160 112 -0,06 to 0,12 bar 10 PUSPL 175 AS 175 123 -0,05 to 0,10 bar 10 PUSPL 200 AS 200 140 -0,05 to 0,08 bar 10 PUSPL 250 AS 250 175 -0,04 to 0,05 bar 10 PUSPL 300 AS 300 210 -0,03 to 0,03 bar 10 PUSPL 350 AS 350 245 -0,02 to 0,02 bar 10 PUSPL 400 AS 400 280 -0,02 to 0,02 bar 10 PUSPL 450 AS 450 315 -0,01 to 0,01 bar 10 PUSPL 500 AS 500 350 -0,01 to 0,01 bar 10 Medium heavy, wall thickness: ca. 0.5 - 0.6 mm PUSPM 50 AS 50 50 -0,35 to 1,2 bar 30 PUSPM 60 AS 60 60 -0,30 to 1,0 bar 30 PUSPM 70 AS 70 70 -0,25 to 0,8 bar 30 PUSPM 75 AS 75 75 -0,20 to 0,8 bar 30 PUSPM 80 AS 80 80 -0,20 to 0,7 bar 30 PUSPM 90 AS 90 90 -0,20 to 0,7 bar 30 PUSPM 100 AS 100 100 -0,15 to 0,6 bar 30 PUSPM 110 AS 110 110 -0,15 to 0,6 bar 30 PUSPM 125 AS 125 125 -0,15 to 0,5 bar 30 PUSPM 130 AS 130 130 -0,15 to 0,5 bar 30 PUSPM 140 AS 140 140 -0,15 to 0,5 bar 30 PUSPM 150 AS 150 150 -0,10 to 0,4 bar 30 PUSPM 160 AS 160 160 -0,10 to 0,4 bar 30 PUSPM 170 AS 170 170 -0,10 to 0,4 bar 30 PUSPM 180 AS 180 180 -0,10 to 0,4 bar 30 PUSPM 200 AS 200 200 -0,10 to 0,3 bar 30 PUSPM 250 AS 250 250 -0,05 to 0,2 bar 15 PUSPM 300 AS 300 300 -0,04 to 0,2 bar 15 Heavy, wall thickness: ca. 1.0 mm PUSPS 13 AS 13 19 -0,80 to 3,0 bar 10 PUSPS 20 AS 20 30 -0,70 to 2,3 bar 10 PUSPS 25 AS 25 38 -0,50 to 1,9 bar 10 PUSPS 30 AS 30 45 -0,40 to 1,6 bar 10 PUSPS 40 AS 40 66 -0,70 to 2,6 bar 30 PUSPS 50 AS 50 83 -0,60 to 2,0 bar 30 PUSPS 60 AS 60 99 -0,50 to 1,8 bar 30 PUSPS 70 AS 70 116 -0,45 to 1,5 bar 30 PUSPS 75 AS 75 123 -0,40 to 1,3 bar 30 PUSPS 80 AS 80 132 -0,40 to 1,2 bar 30 PUSPS 100 AS 100 150 -0,30 to 1,0 bar 30 PUSPS 125 AS 125 185 -0,25 to 0,8 bar 30 PUSPS 150 AS 150 225 -0,25 to 0,8 bar 30 PUSPS 175 AS 175 260 -0,11 to 0,25 bar 10 PUSPS 200 AS 200 300 -0,10 to 0,2 bar 10 PUSPS 250 AS 250 375 -0,07 to 0,12 bar 10 Materials: Polyether polyurethane coating with a coppered/bronze steel wire coil incorporated in the wall. temperature range: -40°C to max. +90°C, temporary to +125°C Properties: High quality permanent anti-static PU hose (not option -LE ), high tear and abrasion resistance, high elasticity and ageing resistance. Halogen and plasticiser additives free, to a large extent resistant against solvents, oils, grease, wax, petrol, hydrolysis and microbes, bend resistant. The transparency helps to monitor the working processes very effec- tively. Field of application: Suction (industrial suction unit) of gases, chippings, oil mist, paint mist or dust, for passing granu- late, gravel, sand, dust, wood, grains, cement or oil, in chemical industry, paint and lacquer industry, lumber industry (also can be used in areas exposed to the risk of fire. Advantages: Ÿ PU hose is often more abrasion resistant than the common rubber hose Ÿ Minor settling of the transported material by relatively smooth inner walls Ÿ flame-resistant according to DIN 4102 B1, compliant with TRGS 727 (not option -LE ) Ÿ permanent anti-static (R<10 8 Ohm/m), conductive acc. to BGI 739-2 when the coils are grounded (not option -LE ) Ÿ hydrolysis and microbe resistant, thus also use for moist media Optional: food-safe according to regulations (EC) no. 1935/2004 & (EU) no. 10/2011, FDA 21 CFR 177.2600 & 178.2010, not anti-static, without B1 approval/TRGS -LE ü F Suction-pressure PU coil tubes - flame retardant, antistatic & hydrolysis resistant APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 221