APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Special hoses Sandblast hoses with abrasion resistant inner tubes EN ISO 3861:2008 Materials: Inner tube: Abrasion resistant NR/SBR/BR, black, smooth, anti-static, abrasion value: Max. 50 mm³ in accor- dance with ISO 4649, pressure carrier: Wounded textile inlays, cover: SBR, black, fabric finished, anti-static Temperature range: -35°C to +80°C Operating pressure: 12 bar, burst pressure approx. 40 bar Electrical resistance: <10 6 Ohm/m Operating range: Conducting dry or wet commercially available blasting abrasives like sand, steel grit, corundum or quartz powder Roll length: 40 m Type SSGS 13 13 ( 1 / 2 “) 27 SSGS 19 19 ( 3 / 4 “) 33 SSGS 25 25 (1“) 39 SSGS 32 32 (1 1 / 4 “) 48 SSGS 38 38 (1 1 / 2 “) 56 SSGS 42 42 (1 3 / 4 “) 60 SSGS 50 50 (2“) 70 Note: This hose is designed to take a pressure of 12 bar. As a safety precaution EN ISO 3861 specifies a max. working pressure of 6.3 bar. Tanker truck suction-pressure hoses made of NBR EN 12115 Type TWSSP 19 19.0 ( 3 / 4 “) 31.0 125 40 TWSSP 25 25.0 (1“) 37.0 150 40 TWSSP 32 32.0 (1 1 / 4 “) 44.0 175 40 TWSSP 38 38.0 (1 1 / 2 “) 51.0 225 40 TWSSP 50 50.0 (2“) 66.0 275 40 TWSSP 63 63.5 (2 1 / 2 “) 79.0 300 40 TWSSP 75 75.0 (3“) 91.0 350 40 TWSSP 100 100.0 (4“) 116.0 450 20 Materials: Inner tube: NBR, black, extruded, insert: With steel wire coil and copper strand, cover: NBR/SBR, black, fabric finished, abrasion resistant, anti-static Temperature range: -25°C to max. +80°C (oil to max. +100°C; biodiesel left natural or esterified max. +40°C) Operating pressure: 16 bar, burst pressure: 64 bar (100 mm: 12 bar, burst pressure: 48 bar) Vacuum range: -0.9 bar (> 63 mm: - 0.8 bar) Electrical resistance: R <10 6 Ohm/m Operating range: Oil and petrol resistant suction and pressure hose for mineral oil products with a maximum aromatic content of 50%. Suitable for a tank truck hose for various media such as petrol (DIN EN 228), diesel (DIN EN 590), Bio- diesel (DIN EN 14214), heating oil, natural vegetable oils, turpentine and ester products (RME). Flame resistance in ac- cordance with TRbF 131, Section 2, Paragraph 5.5. Hot air blowers are found on page 642 Shrink tubes Type Amount SCHRUMPF 1,2 1.2 20 m box SCHRUMPF 1,6 1.6 20 m box SCHRUMPF 2,4 2.4 15 m box SCHRUMPF 3,2 3.2 11.5 m box SCHRUMPF 4,8 4.8 10 m box SCHRUMPF 6,4 6.4 10 m box SCHRUMPF 9,5 9.5 6.5 m box SCHRUMPF 12,7 12.7 6 m box SCHRUMPF 15,9 15.9 5 m box SCHRUMPF 19,1 19.1 3 m box SCHRUMPF 25,4 25.4 3 m box Material: Polyolefin, black, flame resistant in accordance with UL 224 Temperature range: -55°C to max. +125°C Shrink temperature: Min. 90°C Shrink ratio: 2:1 Advantages: • Supplied in practical dispenser box • Flame resistance to UL 224 ü Tanker truck couplings from page 169 Sandblast couplings from page 177 Hose Ø external Hose Ø internal Roll length m Min. bend radius Inside Ø unshrunk Hose Ø external Hose Ø internal We cut ou r hoses to you r r equi r ed le n gth! Contact us for pre-cut and assembled parts to special co n ditio n s. APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 219