APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Silicone hoses Silicone hoses (industrial quality) Version: Transparent, 60° Shore hardness (±5°), talc-powered, without fabric braiding, material according to FDA 21 CFR 177.2600 Temperature range: -60°C to max. +200°C, with steam to 135°C sterilisation possible Pressure range: For passing through liquids and gases not exposed to pressure Roll length: 25 m Type Sili 12 1 x 2 Sili 13 1 x 3 Sili 1.52.5 1.5 x 2.5 Sili 23 2 x 3 Sili 24 2 x 4 Sili 25 2 x 5 Sili 26 2 x 6 Sili 34 3 x 4 Sili 35 3 x 5 Sili 36 3 x 6 Sili 37 3 x 7 Sili 45 4 x 5 Sili 46 4 x 6 Sili 47 4 x 7 Sili 48 4 x 8 Sili 410 4 x 10 Type Sili 56 5 x 6 Sili 57 5 x 7 Sili 58 5 x 8 Sili 59 5 x 9 Sili 67 6 x 7 Sili 68 6 x 8 Sili 69 6 x 9 Sili 610 6 x 10 Sili 612 6 x 12 Sili 710 7 x 10 Sili 711 7 x 11 Sili 810 8 x 10 Sili 811 8 x 11 Sili 812 8 x 12 Sili 814 8 x 14 Sili 913 9 x 13 Type Sili 1012 10 x 12 Sili 1014 10 x 14 Sili 1015 10 x 15 Sili 1016 10 x 16 Sili 1018 10 x 18 Sili 1216 12 x 16 Sili 1218 12 x 18 Sili 1418 14 x 18 Sili 1519 15 x 19 Sili 1521 15 x 21 Sili 1620 16 x 20 Sili 1824* 18 x 24 Sili 2024 20 x 24 Sili 2533 25 x 33 FDA * not according to FDA Silicone hoses with fabric braiding up to 200°C Version: Inner tube transparent, outer layer red, polyester fabric braiding, 70° Shore hardness (± 5°), material accor- ding to FDA 21 CFR 177.2600 Temperature range: -50°C to max. +180°C (temporary to max. +200°C) Operating pressure: Approx. 1/3 of the burst pressure Type TX 3 Sili 3 x 8 60 bar 50 TX 4 Sili 4 x 10 60 bar 50 TX 6 Sili 6 x 12 40 bar 50 TX 8 Sili 8 x 15 30 bar 50 TX 10 Sili 10 x 17 25 bar 50 TX 12 Sili 12 x 20 19 bar 50 TX 14 Sili 14 x 22 17 bar 50 TX 16 Sili 16 x 26 15 bar 50 TX 19 Sili 19 x 29 12 bar 25 FDA Type Internal Ø Flame retardant hose (roller length 15 m) FSS 6 6 FSS 8 8 FSS 10 10 FSS 13 13 FSS 16 16 FSS 19 19 FSS 22 22 FSS 25 25 FSS 29 29 FSS 32 32 FSS 35 35 FSS 38 38 FSS 41 41 FSS 44 44 FSS 51 51 Approx. 11 m tape band to seal and fix the ends, max. +246°C FSS TAPE 25 25 mm wide, 0.5 mm thick FSS TAPE 38 38 mm wide, 1.5 mm thick Flame retardence and insulation hoses (industrial quality) Application: Protects against the effects of external heat and prevents heat loss, repels liquid metal splashes (foundry glass processing) Materials: Outside mantle: Temperature resistant special silicone, internal mantle: Special glass fibre mesh Temperature range: -60°C to max. +260°C (cont. temp.), +1090°C (approx. 15-20 min), +1650°C (approx. 15-30 sec.) Note: Fix the protective hose at the ends using FSS TAPE, with 50% overlapping Threaded nozzles & hose nozzles from page 64 Distributor bars from page 132 Mould couplings from page 164 to 160°C Hose clamps from page 234 Silicone hot air hoses from page 224 Hose Ø internal x ext. Hose Ø internal x ext. Hose Ø internal x ext. Burst pressure Roll length m Hose Ø internal x external APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 215