APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 4 Compressed air and water hoses KTW Fire extinguishing hoses with Storz couplings and meter goods DIN 14811 (2008) Materials: Inner tube: High quality, light, synthetic EPDM based internal lining, outer coating: Oil and petrol resistant, abrasion resistant and flame resistant, fabric: 100% polyester yarn, Storz coupling: Aluminium (forged) with rotating NBR seals Temperature range: -30°C to max. +60°C Operating pressure: 17 bar (burst pressure: 60 bar) Properties: DIN-Fire extinguishing hose, very flexible, rot resistant, lower space requirement, requires no service or maintenance, cold resistant Approvals/standards: DIN 14811 (2008), SIS, ÖNORM, SBG, Loba Colour: white, class 1-L1 FiRE 25-5 FiRE 25-10 FiRE 25-15 FiRE 25-20 FiRE 25-30 25 25-D 31 FiRE 42-5 FiRE 42-10 FiRE 42-15 FiRE 42-20 FiRE 42-30 42 52-C 66 FiRE 52-5 FiRE 52-10 FiRE 52-15 FiRE 52-20 FiRE 52-30 52 52-C 66 FiRE 75-5 FiRE 75-10 FiRE 75-15 FiRE 75-20 FiRE 75-30 75 75-B 89 Colour: red, class 2 FiRE 25-5 rot FiRE 25-10 rot FiRE 25-15 rot FiRE 25-20 rot FiRE 25-30 rot 25 25-D 31 FiRE 42-5 rot FiRE 42-10 rot FiRE 42-15 rot FiRE 42-20 rot FiRE 42-30 rot 42 52-C 66 FiRE 52-5 rot FiRE 52-10 rot FiRE 52-15 rot FiRE 52-20 rot FiRE 52-30 rot 52 52-C 66 FiRE 75-5 rot FiRE 75-10 rot FiRE 75-15 rot FiRE 75-20 rot FiRE 75-30 rot 75 75-B 89 FiRE 25 FiRE 25 rot 25 20 FiRE 42 FiRE 42 rot 42 20 FiRE 52 FiRE 52 rot 52 20 FiRE 75 FiRE 75 rot 75 20 ** other lengths on request Goods Industrial construction hoses with Storz couplings Materials: Polyester yarn rubber lined, Storz coupling: Aluminium (cast) with rotating NBR seals Temperature range: 0°C to max. +40°C Operating pressure: 10 bar (burst pressure: 30 bar) Properties: Rot resistant, abrasion resistant, flexible, enhanced flame resistance, no approvals! FiRE 25-5 B FiRE 25-10 B FiRE 25-15 B FiRE 25-20 B FiRE 25-30 B 25 25-D 31 FiRE 52-5 B FiRE 52-10 B FiRE 52-15 B FiRE 52-20 B FiRE 52-30 B 52 52-C 66 FiRE 75-5 B FiRE 75-10 B FiRE 75-15 B FiRE 75-20 B FiRE 75-30 B 75 75-B 89 Especially good value! Assembled with coupling! Assembled with coupling! Assembled with coupling! Flat compressed air-water hoses Temperature range: Water: -20°C to max. +100°C, air: -20°C to max. +75°C Operating range: For water, air, oil and petrol, conditionally resistant to alkalis and acid. The hose can be retracted flat, ozone and aging resistant. It can be exposed to great loads due to textile insert with high tear strength. The outside cover is wear stabilised due to the longitudinal protection ribs. Type PN* GSF 19 2.0 20 ( 3 / 4 “) 30 bar 90 bar 60 GSF 25 2.0 26 (1“) 30 bar 90 bar 60 GSF 32 2.0 32 (1 1 / 4 “) 25 bar 80 bar 60 GSF 38 2.0 38 (1 1 / 2 “) 20 bar 60 bar 60 GSF 52 2.2 52 (2“) 16 bar 50 bar 60 GSF 65 2.2 65 (2 1 / 2 “) 16 bar 50 bar 20 GSF 75 2.4 76 (3“) 16 bar 50 bar 20 GSF 90 2.5 90 15 bar 45 bar 20 GSF 102 2.5 102 (4“) 13 bar 40 bar 20 GSF 125 3.0 125 (5“) 15 bar 45 bar 20 GSF 150 3.0 150 (6“) 13 bar 35 bar 20 * operating pressure for water, for compressed air, the operating pressure is 25% of the burst pressure maximum Drinking water flat hoses with Storz couplings and meter goods Materials: Thermoplastic polyurethane, fabric: 100% polyester yarn, Storz coupling: Lug: Aluminium (forged), rotatable brass connectors with silicone seal (KTW approved) Temperature range: -30°C to max. +60°C (KTW approval category "A" to max. +23°C) Operating pressure: 17 bar (burst pressure: 50 bar) Properties: Drinking water hose, ageing- and ozone resistant, high abrasion resistance Approvals/standards: KTW recommendation category "A" (cold water up to max. +23°C), DVGW-W270 FiRE 25-5 KTW FiRE 25-10 KTW FiRE 25-15 KTW FiRE 25-20 KTW FiRE 25-30 KTW 25 25-D 31 FiRE 52-5 KTW FiRE 52-10 KTW FiRE 52-15 KTW FiRE 52-20 KTW FiRE 52-30 KTW 52 52-C 66 FiRE 75-5 KTW FiRE 75-10 KTW FiRE 75-15 KTW FiRE 75-20 KTW FiRE 75-30 KTW 75 75-B 89 Storz couplings from page 182 Hose Ø internal Wall thickness Burst pressure Roll length m Hose Ø internal Working length 5 m Working length 30 m Working length 20 m Working length 15 m Working length 10 m Storz alu. coupling Lug distance Hose Ø internal Hose Ø internal Working length 5 m Working length 30 m Working length 20 m Working length 15 m Working length 10 m Storz alu. coupling Lug distance Roll length m** Type red class 2 Type white class 1-L1 Hose Ø internal Working length 5 m Working length 30 m Working length 20 m Working length 15 m Working length 10 m Storz alu. coupling Lug distance APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl 211