APH techniek

All data are considered to be unbinding reference values. We accept no liability for data selection that is not confirmed in writing. Pressure data refer, if not otherwise indicated, to liquids of Group II at +20°C. 2 Thread W 50 MSV --- --- M5 W 18 MSV W 18 MS* W 18 MD ES G 1 / 8 “ W 14 MSV W 14 MS W 14 MD ES G 1 / 4 “ W 38 MSV W 38 MS W 38 MD ES G 3 / 8 “ W 12 MSV W 12 MS W 12 MD ES G 1 / 2 “ W 34 MSV W 34 MS --- G 3 / 4 “ W 10 MSV W 10 MS --- G 1“ --- W 114 MS --- G 1 1 / 4 “ --- W 112 MS --- G 1 1 / 2 “ --- W 20 MS --- G 2“ * design as for MSV Angles 90° with female threads (forged) up to 150 bar Elbows 90° with female threads PN 25 L L Thread BO 14 i ST 40 --- --- Rp 1 / 4 “ BO 38 i ST 48 --- --- Rp 3 / 8 “ BO 12 i ST 55 BO 12 iK ST 45 Rp 1 / 2 “ BO 34 i ST 69 BO 34 iK ST 50 Rp 3 / 4 “ BO 10 i ST 85 BO 10 iK ST 63 Rp 1“ BO 114 i ST 105 BO 114 iK ST 76 Rp 1 1 / 4 “ L L type 2/G1 type 2a/D1 Note: Ÿ Do not use PVC-U damaging thread seals! Threaded angles PVC-U (for plastic threads only) PN 10 Warning: Not suitable for compressed air or other gases under pressure! D L fe m ale thread Type Thread W 38 PVC Rp 3 / 8 “ 23.5 23 W 12 PVC Rp 1 / 2 “ 28.0 25 W 34 PVC Rp 3 / 4 “ 34.0 30 W 10 PVC Rp 1“ 43.0 36 W 114 PVC Rp 1 1 / 4 “ 54.0 41 W 112 PVC Rp 1 1 / 2 “ 63.0 46 W 20 PVC Rp 2“ 78.0 57 W 212 PVC Rp 2 1 / 2 “ 89.0 84 W 30 PVC Rp 3“ 106.0 99 W 40 PVC Rp 4“ 129.0 119 long short Materials: Malleable cast iron galvanised L L Thread BO 112 i ST 116 BO 112 iK ST 85 Rp 1 1 / 2 “ BO 20 i ST 140 BO 20 iK ST 102 Rp 2“ BO 212 i ST 176 --- --- Rp 2 1 / 2 “ BO 30 i ST 205 --- --- Rp 3“ BO 40 i ST 260 --- --- Rp 4“ type 90/A1 Type 16 bar brass nickel-pl. Type 16 bar brass Type 150 bar AISI 316L Angle fittings Type short (2a) Type long (2) Type long (2) Type short (2a) External Ø D Installation length L Angles 90° with female threads (cast) up to 25 bar Thread Thread Standard W 18 ES E W 18 ES --- Rp 1 / 8 “ W 18 ES NPT NPT 1 / 8 “ W 14 ES E W 14 ES W 14 ST Rp 1 / 4 “ W 14 ES NPT NPT 1 / 4 “ W 38 ES E W 38 ES W 38 ST Rp 3 / 8 “ W 38 ES NPT NPT 3 / 8 “ W 12 ES E W 12 ES W 12 ST Rp 1 / 2 “ W 12 ES-NPT NPT 1 / 2 “ W 34 ES E W 34 ES W 34 ST Rp 3 / 4 “ W 34 ES-NPT NPT 3 / 4 “ W 10 ES E W 10 ES W 10 ST Rp 1“ W 10 ES-NPT NPT 1“ W 114 ES E W 114 ES W 114 ST Rp 1 1 / 4 “ W 114 ES-NPT NPT 1 1 / 4 “ W 112 ES E W 112 ES W 112 ST Rp 1 1 / 2 “ W 112 ES-NPT NPT 1 1 / 2 “ W 20 ES E W 20 ES W 20 ST Rp 2“ W 20 ES-NPT NPT 2“ --- W 212 ES W 212 ST Rp 2 1 / 2 “ --- --- --- W 30 ES W 30 ST Rp 3“ --- --- --- W 40 ES W 40 ST Rp 4“ --- --- Reduced --- --- W 1238 ST Rp 1 / 2 “ / Rp 3 / 8 “ --- --- --- --- W 3412 ST Rp 3 / 4 “ / Rp 1 / 2 “ --- --- --- --- W 1012 ST Rp 1“ / Rp 1 / 2 “ --- --- --- --- W 1034 ST Rp 1“ / Rp 3 / 4 “ --- --- --- --- W 11410 ST Rp 1 1 / 4 “ / Rp 1“ --- --- --- --- W 112114 ST Rp 1 1 / 2 “ / Rp 1 1 / 4 “ --- --- --- --- W 20112 ST Rp 2“ / Rp 1 1 / 2 “ --- --- Type 10 bar AISI 316 Type 16 bar AISI 316 Type 16 bar AISI 316 Type 25 bar mall. cast iron galv. 120 APH Techniek BV - Wateringen - T +31 (0)174 219 200 - sales@aphtechniek.nl - www.aphtechniek.nl